Stock all-JIC tee bere a port abiɛsa a ɛwɔ mfonini no so nyinaa kura 37 degree cone. Stock run tee bere a ɛsɛ sɛ hyɛn gyinabea biako yɛ SAE O-ring boss. Run tee vs branch tee gyinaesi no nyɛ ɔfã bɛn na ɛyɛ den.
Bere bi adwumayɛfo bi a wɔboaboa nneɛma ano yɛɛ press circuit foforo a metric 24 degree cone fittings a ɛte sɛ nea ɛteɛ, a wɔde nhama abɔ mu yiye, na wodii nkonim wɔ nhyɛso sɔhwɛ a edi kan no mu. Adapɛn abiɛsa akyi no, nkwaa biara a ɛwɔ ɔfã a ɛkorɔn no sui.
Quet krataa biara wɔ adum abien, na zinc-nickel adum no bo yɛ den bere nyinaa. Mmuae tiawa no ni kan: tua zinc-nickel plating bere a wo fittings hu wim tebea, nkyene anaa washdown. Tra ne standard zinc plating bere a wɔte dan mu wɔ fixed power unit so.
Bere bi adwini kuw bi penee mfonini a wɔde manifold a G1/4 hyɛn gyinabea wɔ ɔfã biako na M14x1.5 hyɛn gyinabea wɔ ɔfã foforo so. Ná abien no nyinaa te sɛ hydraulic nhama a wɔtaa de di dwuma. Ɔdemafo no de adapters a wɔahyɛ no agyirae 'metric/BSP interchangeable.' Bere a wɔde hyɛɛ adwuma mu no, nkwaa a ɛto so abien biara sui ngo. Batch no san bae. Saa mfomso no
Hydraulic line a ɛsɛ sɛ ɛtwa tank fasu, frame plate anaa manifold panel hia sealed pass-through. 6C metric bulkhead fitting no yɛ saa adwuma no ne 24° cone light series awiei abien, a wɔasi no sɛnea DIN 2353 ne ISO 8434-1. Saa akwankyerɛ yi ka kɛseɛ dodoɔ, nhama a wɔahyehyɛ, nhyɛsoɔ dodoɔ ne h
1EN yɛ hydraulic adapter a ɛyɛ tẽẽ a ɛka asaawa wiase ahorow abien bom. Ɛyɛ ɔfã a ɛyɛ gyinapɛn a wɔde bata metric ported block anaa cylinder ho wɔ hose anaa pipe a wɔde NPT awiei asisi ho. Saa akwankyerɛ cove yi
1J9 yɛ 90-degree hydraulic elbow adapter a JIC mmarima 37° flare awiei wɔ hyɛn gyinabea abien no nyinaa. Ɛka mmea JIC fittings anaa tube awiei abien bom baabi a ɛsɛ sɛ line bi dan ntwea bi a enni couplings foforo.The 1J9 yɛ 90-degree hydraulic elbow adapter a JIC mmarima 37° flare awiei wɔ hyɛn gyinabea abien no nyinaa. Ɛka JIC fittings anaa tube awiei abien a ɛyɛ mmea bom wɔ baabi a ɛsɛ sɛ line bi dan ntwea bi a enni couplings foforo.
50011 metric standpipe tẽẽ no de metric dade tubing (6–42 mm) bata braided anaa spiral hydraulic hoses ho sɛnea DIN 2353 / ISO 8434-1 kyerɛ no. Ɛwɔ hɔ wɔ light series to 315 bar ne heavy series to 630 bar, machined fi C45 dade a zinc-nickel plating. Ɔfã-nɔma matched sets bi ne standpipe, ferrule, nut, ne cutting ring.The 50011 metric standpipe tẽẽ no bata metric dade tubing (6–42 mm) to braided anaa spiral hydraulic hoses sɛnea DIN 2353 / ISO 8434-1.
