1' Flat-Face Hydraulic Quick Coupler (ISO 16028) - Model zawng zawng | 250 Bar High Pressure hmanga siam a ni

He series of 1' flat-face hydraulic quick couplers hi  ISO 16028  international standards zawm a ni a, 250 bar high working pressure leh ±230 L/min flow rate a nei a, temperature range zau tak -25°C atanga +100°C thlenga hman theih a ni. Push-connect leh ball housing retraction disconnect design hmanga awlsam leh tha taka hnathawh theihna turin coupler zawng zawng hian trivalent zinc plated surface finish an nei vek a, a tha zawk corrosion resistance, NBR (nitrile rubber) sealing rings leh PTFE anti-extrusion rings nena inmil, pressure sang tak hnuaia leak-proof leh stable performance neih theihna turin  mipa, hmeichhia (1' NPT/M30x2) leh complete (dual-thread)  model-ah te industrial hydraulic system connection mamawh zawng zawng phuhruk turin a awm.

A chiang zawk

• Hnathawh Pressure : 250 Bar

• Hnathawh dan : -25°C atanga +100°C thleng

• A luang chhuak zat : ±230 L/min

• A chunglam Finish : Trivalent Zinc Plated (a hnim leh a chhe thei lo)

• Sealing Material : NBR (Nitrile Rubber) - oil-resistant, sealing tha tak a ni

• Anti-Extrusion Ring : PTFE - pressure sang tak hnuaiah seal extrusion a veng thei

• Locking System : Steel Balls Polished (connection him tak, anti-loosening) hmanga siam a ni.

• A zawm dan : ISO 16028 International Standard

  
  

• 5173 (Mipa | 1' NPT) a ni.

• A sei zawng zawng chu 107.1 mm niin 1′′–11.5 NPT male thread leh 55 mm male wrench size a ni a; hmeichhe hydraulic fittings nena direct connection atan single male end design, fixed hydraulic line male end connection atan a tha hle.
• 
  

• 5174 (Hmeichhia | 1' NPT)

• A sei zawng zawng chu 100.2 mm a ni a, a sei zawng chu 1′′–11.5 NPT hmeichhe thread leh hmeichhe wrench size 50 mm a ni a; space-saving design, hydraulic equipment atan a tha hle a, installation space tlem leh 1' NPT thread mamawhna a nei bawk.
• 
  

• 5179 (Hmeichhia | M30x2) .

• A sei zawng zawng chu 121.2 mm niin M30x2 female thread leh 50 mm female wrench size a awm a; industrial hydraulic system tan model bik M30x2 thread specification nei, stable matching leh leakage awm lo.
• 
  

• 5175 (A kim | 1' NPT Mipa & Hmeichhia)

• A sei zawng zawng chu 185.5 mm a ni a, dual 1′′–11.5 NPT mipa/hmeichhia thread, 55 mm mipa leh 50 mm hmeichhia wrench size a awm a; versatile dual-thread design, adapter dang hman a ngai tawh lo a, flexible hydraulic line cross-connection atan a tha hle.
• 
  

• Operation Instruction awlsam tak tak

• Connection : Male coupler chu pressure hnuaiah hmeichhe coupler chhungah nawr lut rawh - automatic locking via polished steel balls hmangin connection rang tak a awm theih nan.

• Disconnection : Ball housing chu align hmasa la, chutah chuan sleeve chu retract la, lock chu chhuah tir rawh - pressure relief awm lovin disconnection him leh awlsam tak.

• Premium Material a thatna te

• Trivalent Zinc Plating : High-density surface coating, rust leh industrial wear laka invenna chak tak, product service life 50%+ a ti rei.

  NBR Sealing : Oil, solvent leh aging resistance tha tak, hydraulic media hman tlanglawn zawng zawng (hydraulic oil, mineral oil, etc.) ah a insiamrem thei.

  PTFE Anti-Extrusion Ring : Temperature leh pressure sang tak a do thei a, seal ring deformation/extrusion a veng a, hun rei tak chhunga sealing stability a tichiang bawk.

  Polished Steel Balls : A khauhna sang tak leh a chunglam a hrual, a locking dik tak, hnathawh laiin jamming a awm lo.

• A hmanna tur Scenario zau tak tak

• a tha   Industrial hydraulic system, in sakna machinery, agriculture hmanrua, hydraulic power unit, mining machinery, leh industrial fluid transfer line atan high-pressure, high-flow working condition-a hydraulic line-te rang taka connection/disconnection atan a tha hle.