1JFS9 90° JIC Mipa atanga Code 61 Flange Adapter (S-Series) thlenga hman theih a ni.

1JFS9 90° JIC Male Flange Adapter hi eng nge ni?

1JFS9 hi 90° elbow hydraulic adapter a ni a, a hydraulic adapter a ni. A tawp pakhat: JIC mipa 74° cone (SAE J514, UNF) a ni. A dang chu: S-Series split flange (ISO 6162-2, Code 62) a ni. Rated 6000 PSI a ni. Bend hian harsatna awmte vel line a kalpui thin. Extra couplings a ngai lo.

He adapter hi Ruihua Hardware atanga ISO 6162 flange fitting range atanga lo chhuak a ni. Range-ah hian a tel ve bawk 1JFL9 L-Series (Code 61, 3000 PSI)  chi hrang hrang, pressure hniam zawk circuit tan a ni. He page-a S-Series version hian heavy-duty system tan 6000 PSI working pressure a handle a ni.

A taksa hi 45# medium carbon steel a ni. Production-ah hian cold heading, hot forging, leh CNC turning te hman a ni. Zinc plating hian darkar 96+ chhung zet salt spray test a paltlang a ni.

1JFS9 Adapter-a thil pawimawh ber berte

Dual-Standard hmanga inzawmna siam a ni

JIC 74° male cone (SAE J514) chu a tawp khatah a awm. S-Series split flange (ISO 6162-2) a awm bawk. Coupling hran siam a ngai lo.

13 Size a awm

Flange size 1/2' atanga 1-1/2' thleng a ni. JIC hian 3/4'-16 UNF atanga 1-7/8'-12 UNF ah a thread a. Config awm thei tihtlem (1JFS9-12-16, 1JFS9-20-24).

6000 PSI Rated a ni

S-Series flange end rates chu 6000 PSI (414 bar) thleng size 1'. Pump outlet leh press circuit-ah a inmil.

Corrosion-Resistant Finish a ni

Zinc hmanga siam a ni. Silver finish a ni. Darkar 96+ chhung salt spray test (5% NaCl) a paltlang. Pawn lam leh tuipui kama hmanrua atan.

CNC Precision a ni

Cold heading, hot forging, CNC turning te pawh a awm bawk. Dimensional dik tak a ni. ISO 9001:2015 leh IATF 16949:2016 quality system hmanga siam a ni.

JIC Seal hman nawn theih a ni

74° cone seat hi hman nawn theih a ni. A then la, inzawm leh rawh. Seal thlak ngai lo. Maintenance hun a ti tlem.

1JFS9 Specifications leh Dimensions te

Dimension zawng zawng chu millimeter-ah a ni. Thread size hrang hrangte hian UNF standard an zawm a ni. Flange size hian S-Series (ISO 6162-2) connection-a nominal bore a tarlang a ni. O-ring, clamp half, leh bolt te chu a hranin an hralh thin.

Material chungchang tlangpui

Note:  O-ring, split flange clamp halves, leh bolt te hi a tel lo. A hranin order rawh. Tubing connection atan chuan metric tube atan nut NB200 with sleeve NB500 hmang la, inch tube atan nut NB200 with sleeve NB300 hmang bawk ang che.

1JFS9 Adapter hmanna hmun

1JFS9 hi high-pressure hydraulic circuit tan a tha hle. JIC port pakhat chu S-Series flange port nen 90°-ah a inzawm khawm a ni. Hman dan tlangpui:

• In sakna hmanrua — excavator, loader, bulldozer te

• Lo neihna hmanrua — tractor, harvester, sprayer

• Mining hmanrua — drill, conveyor, crusher te

• Truck rit tak tak — tipper cylinder, tail lift te

• Industrial hydraulics — press, mold, clamp te hmanga siam a ni

• Tuipui lama system hrang hrang — winch, steering, deck crane te

• Hydraulic press leh molding hmanrua te

• Mobile hydraulics — truck-a dah leh phurh theih hmanrua

S-Series end bolt hian pump outlet, valve block, leh cylinder port-ah Code 62 connection a nei a ni. JIC end hian hose leh tube-ah hmeichhe JIC fittings a nei a. Kan en rawh JIC fittings khawlkhawm  leh full flange fitting range a awm bawk.

Zawhna Zawh fo thin

Code 61 leh Code 62 SAE flange te hi eng nge an danglamna?

Code 61 (ISO 6162-1) hmangin 3000 PSI a ni. Code 62 (ISO 6162-2) hi S-Series a ni a, 6000 PSI a ni. 1JFS9 hian S-Series flange end (ISO 6162-2) a hmang a. Code pahnih hi inthlak danglam theih a ni lo. Bolt pattern, flange head diameter, leh O-ring groove size-ah te nominal bore inangah an danglam a ni. Ruihua Hardware hian series pahnih hi a supply vek a ni. He page hian PSI circuit 6000 tan S-Series a huam a ni.

1JFS9 flange adapter hi eng material atanga siam nge a nih?

Adapter body hi 45# medium carbon steel a ni. Nut hi 35# emaw 08# emaw carbon steel a ni. A chung zawng zawng chu zinc-plated a ni. Salt spray resistance hi darkar 96 aia tam a ni.

1JFS9 tan hian O-ring leh clamp hi a hranin order ka ngai em?

Awle. O-ring, split flange clamp halves, leh bolt te hi a tel lo. A hranin order rawh. O-ring size hi flange size a innghat a: 1/2 inch hian O210 a hmang a, 3/4 inch hian O214 a hmang a, 1 inch ah O219 a hmang bawk.

1JFS9 adapter hian eng standard nge a zawm?

JIC mipa tawp hian SAE J514 (74-degree cone, UNF threads) a tawk a. Flange tawp hian ISO 6162-2 leh SAE J518 Code 62 (S-Series, 6000 PSI) te a zawm a ni. Ruihua Hardware hian heng adapter te hi ISO 9001:2015 leh IATF 16949:2016 certified quality system hmangin an siam chhuak thin a ni.

1JFS9 S-Series flange hian eng pressure rating nge a support?

S-Series flange end rates hi 6000 PSI (414 bar) thleng a ni a, inch 1 thlenga lian a ni. Size lian zawk a tlahniam: 5000 PSI-ah inch 1-1/4, 4500 PSI-ah inch 1-1/2, 4000 PSI-ah inch 2. Hei hian SAE J518 a zui a ni.

1JFS9 adapter hi metric leh inch tubing pahnih nen hman theih a ni em?

Awle. JIC mipa end hian hmeichhe JIC seat nen an inkawp a ni. Metric tube atan chuan nut NB200 leh sleeve NB500 hmang ang che. Inch tube atan chuan nut NB200 leh sleeve NB300 hmang ang che. Ruihua Hardware hian nut leh sleeve hi adapter body atanga a hranin a supply thin.

A kaihhnawih thil siam

• 1JFL9 – 90° JIC Mipa / L-Series Flange  — Code 61, 3000 PSI chi hrang hrang

• 1JFS5 – 45° JIC Mipa / S-Series Flange  — 45° elbow, 6000 PSI hmanga siam a ni

• 1JFS1 – JIC Mipa / S-Series Flange dik tak  — Adapter dik tak, 6000 PSI

• JIC Fittings Collection  — SAE J514 fittings chi hrang hrang a awm vek

• ISO 6162 Flange Fittings  — Flange adapter chi hrang hrang

1JFS9 Adapter atan Quote dil rawh

Size 13 awm zawng zawng zingah pricing, lead times, leh samples te dawng rawh. Ruihua Hardware hi khawvel hmun hrang hrangah a thawn chhuak thin. min rawn biak theih reng e Quote duh tan

• Email ah hian: ruihua@rhhardware.com

• WhatsApp ah hian: +86 137 3604 8924 ah biak theih a ni

• Phone:  +86-574-62268512 ah zawh theih a ni