1J9 90° JIC Mipa 74° Cone Hydraulic Adapter — A chi hrang hrang, a lian zawng leh a lei dan tur

1J9 hi 90-degree elbow hydraulic adapter a ni a, port pahnihah hian JIC male 37° flare ends a awm a ni. Valve block, pump emaw power unit vel a straight run theih lohna hmuna hydraulic line kalpui nan adapter hman tlanglawn ber pawl a ni. He guide hian thread standard, size awm thei, pressure rating, common part number format leh 1J9 series atana hman dan tlangpui a sawifiah a ni.

1J9 90° JIC Mipa 74° Cone Adapter hi eng nge ni?

1J9 hi forged elbow adapter a ni a, JIC male 37° flare tube tawp pahnih chu 90-degree angle-ah a thlunzawm a ni. Port pahnih hi mipa an nih avangin 1J9 hi hmeichhe JIC fitting pahnih emaw tube end emaw inkarah hman a ni. Product hminga 74° hian sealing seat (flare surface) angle telh a kawk a, chu chu 37° flare tube nipple nena mate turin machine hmanga siam a ni.

1J9 hian SAE J514 leh ISO 8434-2 geometry a zawm a, international brand lian tak tak Parker, Gates, Eaton leh Aeroquip te nen dimensionally interchangeable a ni. Adapter zawng zawng hi Yuyao factory-a packing hmain pressure test vek a ni.

1J9 Adapter-a thil pawimawh ber berte

• Forged C45 / AISI 1045 carbon steel body hmangin burst chakna sang tak a nei a ni.

• Chromate seal hmanga trivalent zinc plating — 96 h neutral salt spray (ASTM B117) a paltlang.

• Leak-free JIC connection atan a tawp pahnihah precision-machined 37° flare sealing surface a awm.

• UNF hian SAE J514 / ISO 8434-2 nen a inmil hle.

• Nau neih hmain 100% pressure test a ni.

• Marine leh chemical service atan stainless steel 316 option dil theih a ni.

1J9 Specification leh Size hrang hrang

Hnathawh temperature range: -30 °C atanga +120 °C thleng standard NBR seal hmangin. FKM (Viton) seal hi temperature sang tak emaw synthetic fluid service atan emaw a awm a.

1J9 Part Number Inhen dan

1J9-08-08 format-ah hian hetiang hian a inziak a ni.

• 1J9  — taksa style: 90° elbow, JIC mipa / JIC mipa.

• -08 (a hmasa ber) — port 1-a dash size (3/4-16 UNF, 1/2' tube) a ni.

• -08 (pahnihna) — port 2-a dash size (3/4-16 UNF, 1/2' tube) a ni.

Reducing elbow tan chuan dash size lian zawk hi a hmasa ber a, entirnan 1J9-12-08. Equal leh reducing configuration te chu dash 04 atanga dash 20 thlengin stock a ni.

1J9 Adapter atana hman tlanglawn tak tak

1J9 hi hydraulic line pakhatin extra couplings dah belh ngai lovin degree 90 a inher tur hmun apiangah hman a ni. A hmanna tlangpui chu:

• Mobile hmanruaa valve manifold chhehvela pressure line routing.

• Power unit-a hose assembly-a pump discharge port inzawmkhawm.

• Excavator, loader leh telehandler-a return-line loop siam.

• Factory automation leh injection molding machine-a hydraulic panel compact tak tak siam a ni.

• Agricultural tractor leh hmun tlemte awmna hmuna harvester te.

1J9 hi Elbow Adapter inang lo tak nen a khaikhin dan

Zawhna Zawh fo thin

1J9 90° JIC male adapter hian eng thread standard nge a hman?

1J9 hian a tawp pahnihah JIC (Joint Industry Council) 37° flare connection a hmang a, SAE J514 leh ISO 8434-2-ah machine hmanga siam a ni. Thread te hi UNF (Unified National Fine) parallel a ni. Product hminga 74° hian flare seat angle a kawk a, flare ngei a kawk lo; flare chu 37° a ni.

1J9 elbow adapter hian engzat nge a hnathawhna pressure sang ber?

Hnathawh pressure hi a lian leh teah a innghat. SAE J514 atanga standard JIC 37° flare pressure ratings chu 1/4 inch ah 5000 PSI vel a ni a, 1/2 inch ah 4500 PSI vel a ni a, 1-1/4 inch ah 2500 PSI vel a ni. Ruihua hardware hian 1J9 adapter tin chu a pack hmain pressure-test a nei thin.

1J9 adapter hi install zawhah hman nawn theih a ni em?

Awle. JIC 37° flare fittings te hi disassemble leh hman nawn theih a ni a, flare sealing surface chu a chhiat loh a, corrosion a awm loh chuan. Sealing cone-ah scoring, galling, emaw ovality 0.005 inch aia sang a lan chuan mating half chu thlak fo ang che.

1J9 hi Parker, Gates emaw Aeroquip part number nen a inmil em?

Awle. 1J9 hian Parker 90° elbow JIC male union, Gates GM-90 leh Aeroquip 2020-90 series te ang bawkin body geometry, thread leh seat dimension a zawm a ni. Ruihua hardware hian 1J9 hi heng brand te tana direct dimensional cross ni turin an siam a ni.

Ruihua hardware hian 1J9 atan hian eng material leh finish nge a hman?

1J9 body hi C45 / AISI 1045 medium carbon steel hmanga machine hmanga siam a ni. Standard finish hi trivalent zinc plating a ni a, chromate seal a nei a, ASTM B117 angin darkar 96 chhung neutral salt spray testing a paltlang thei a ni. Stainless steel 316 hi tuipui leh chemical service atan dil theih a ni.

A kaihhnawih thil siam leh Chhiar dan

• 2J straight JIC mipa / JIC hmeichhia adapter  — inline JIC-a JIC inthlak danglamna atan.

• 1JFS9 90° JIC mipa atanga Code 61 flange adapter  — JIC-to-flange pump connection atan.

• Hydraulic fitting chi hrang hrang sawifiah  — JIC, ORFS, NPT, BSP leh metric thread chungchanga background.

1J9 Adapter te tan Quote dawng rawh

Dash size, quantity leh destination port min hrilh la, sales team chuan working day khat chhungin FOB Ningbo quotation hmangin an chhang ang. Stainless steel 316 leh OEM marking te pawh dil theih a ni.

Kan biak theih reng e →

• Email ah hian: ruihua@rhhardware.com

• WhatsApp ah hian: +86 137 3604 8924 ah biak theih a ni

• Phone:  +86-574-62268512 ah zawh theih a ni