1J9 90° JIC Namiji 74° Mazugi Adaftar Ruwa - Takaddun bayanai, Girman & Jagoran Siyayya

1J9 adaftar ruwa ce mai nauyin 90-digiri na gwiwar gwiwar hannu tare da JIC namiji 37° flare yana ƙarewa a tashoshin jiragen ruwa biyu. Yana ɗaya daga cikin adaftan da aka saba amfani da su don bin layin hydraulic a kusa da shingen bawul, famfo ko naúrar wutar lantarki inda madaidaiciyar gudu ba ta yiwuwa. Wannan jagorar yana bayyana ma'auni na zaren, girman samuwa, ƙimar matsa lamba, tsarin lamba na gama gari da aikace-aikace na yau da kullun na jerin 1J9.

Menene Adaftar Mazugi na 1J9 90° JIC Namiji 74°?

1J9 jabun adaftan gwiwar gwiwar hannu ne wanda ya haɗu da bututun walƙiya na JIC biyu na 37° yana ƙarewa a kusurwar digiri 90. Dukansu tashoshin jiragen ruwa na maza ne, don haka ana amfani da 1J9 tsakanin mata biyu na JIC ko ƙarshen bututu. 74° a cikin sunan samfurin yana nufin haɗaɗɗen kusurwar wurin zama (filin walƙiya), wanda aka ƙera don abokin aure tare da nono mai 37° walƙiya.

1J9 yana biye da SAE J514 da ISO 8434-2 lissafi kuma ana iya musanya shi da girma tare da manyan samfuran duniya kamar Parker, Gates, Eaton da Aeroquip. Ana gwada kowane adaftar matsi kafin shiryawa a masana'antar Yuyao.

Mahimman Fasalolin Adaftar 1J9

• Ƙirƙirar C45 / AISI 1045 jikin ƙarfe na carbon don ƙarfin fashewa.

• Trivalent zinc plating tare da hatimin chromate - ya wuce sa'o'i 96 na gishiri mai tsaka tsaki (ASTM B117).

• Madaidaicin mashin ɗin 37° walƙiya mai rufe saman saman duka biyu don haɗin JIC mara lalacewa.

• Madaidaicin zaren UNF zuwa SAE J514 / ISO 8434-2.

• An gwada matsi 100% kafin bayarwa.

• Bakin karfe 316 zaɓi yana samuwa akan buƙatar sabis na marine da sinadarai.

1J9 Takaddun bayanai da Girma

Yanayin zafin aiki: -30 °C zuwa +120 °C tare da daidaitaccen hatimin NBR. Ana samun hatimin FKM (Viton) don babban zafin jiki ko sabis na ruwa na roba.

Rushewar Lamba 1J9

Tsarin 1J9-08-08 yana karanta kamar haka:

• 1J9  - salon jiki: 90 ° gwiwar hannu, namiji JIC / namiji JIC.

• -08 (na farko) - girman dash na tashar jiragen ruwa 1 (3 / 4-16 UNF, 1/2 'tubu).

• -08 (na biyu) - girman dash na tashar jiragen ruwa 2 (3 / 4-16 UNF, 1/2 'tubu).

Don rage gwiwar hannu, girman dash mafi girma ya zo da farko, misali 1J9-12-08. Daidaitacce da rage jeri ana adana su daga dash 04 zuwa dash 20.

Aikace-aikace gama gari don adaftar 1J9

Ana amfani da 1J9 a duk inda layin ruwa dole ne ya juya digiri 90 ba tare da ƙara ƙarin haɗin gwiwa ba. Aikace-aikace na yau da kullun sun haɗa da:

• Layukan matsa lamba a kusa da maɓallan bawul akan kayan aikin hannu.

• Haɗa tashoshin fitar da famfo zuwa majalissar bututun wutar lantarki.

• Gina madaukai na dawowa akan tonawa, lodi da na'urorin wayar tarho.

• Karamin fa'idodin injin ruwa a cikin masana'anta sarrafa kansa da injunan gyare-gyaren allura.

• Taraktocin noma da masu girbi inda sarari ya iyakance.

Yadda 1J9 ke Kwatanta da Makamantan Adaftan gwiwar gwiwar hannu

Tambayoyin da ake yawan yi

Wane ma'aunin zare ne adaftar namiji na 1J9 90° JIC ke amfani da shi?

A 1J9 yana amfani da JIC (Haɗin gwiwar Masana'antu Council) 37 ° walƙiya haši a kan duka iyakar, machined zuwa SAE J514 da ISO 8434-2. Zaren sun yi daidai da UNF (Unified National Fine). 74 ° a cikin sunan samfurin yana nufin kusurwar wurin zama na flare, ba walƙiya kanta ba; zafin jiki shine 37 °.

Menene matsakaicin matsi na aiki na adaftar gwiwar gwiwar hannu 1J9?

Matsin aiki ya dogara da girman. Standard JIC 37° flare ratings daga SAE J514 kusan 5000 PSI a 1/4 inch, 4500 PSI a 1/2 inch, da 2500 PSI a 1-1/4 inch. Ruihua hardware matsa lamba-gwajin kowane 1J9 adaftan kafin shiryawa.

Za a iya sake amfani da adaftar 1J9 bayan shigarwa?

Ee. JIC 37° na'urorin walƙiya za a iya wargaza su kuma a sake amfani da su, in dai ba a lalace ba kuma babu lalata. Koyaushe maye gurbin rabin mating idan mazugi na hatimin ya nuna zura kwallo, galling, ko ovality sama da 0.005 inch.

Shin 1J9 ya dace da Parker, Gates ko Aeroquip lambobi?

Ee. 1J9 yana biye da lissafi iri ɗaya na jiki, zaren da girman wurin zama kamar ƙungiyoyin maza na Parker 90° gwiwar JIC, Gates GM-90 da jerin Aeroquip 2020-90. Kayan aikin Ruihua yana kera 1J9 don zama giciye kai tsaye ga waɗannan samfuran.

Wane abu da gamawa Ruihua hardware ke amfani da shi don 1J9?

Ana sarrafa jikin 1J9 daga C45 / AISI 1045 matsakaicin ƙarfe na carbon. Daidaitaccen gamawa shine plating na zinc trivalent tare da hatimin chromate wanda ya wuce sa'o'i 96 na gwajin feshin gishiri tsaka tsaki ta ASTM B117. Bakin karfe 316 yana samuwa akan buƙatun sabis na ruwa da sinadarai.

Samfura masu alaƙa da Karatu

• 2J madaidaiciya JIC namiji / JIC adaftar mace  - don jujjuyawar JIC-zuwa-JIC na layi.

• 1JFS9 90 ° JIC namiji zuwa Code 61 adaftar flange  - don haɗin famfo na JIC-zuwa-flange.

• An bayyana nau'ikan dacewa da na'ura mai ba da hanya tsakanin hanyoyin sadarwa  - bango akan JIC, ORFS, NPT, BSP da zaren awo.

Sami Quote don Adaftar 1J9

Faɗa mana girman dash, yawa da tashar tashar jirgin ruwa kuma ƙungiyar tallace-tallace za su ba da amsa a cikin ranar aiki ɗaya tare da faɗin FOB Ningbo. Bakin karfe 316 da alamar OEM suna samuwa akan buƙata.

Tuntube mu →

• Imel: ruihua@rhhardware.com

• WhatsApp: + 86 137 3604 8924

• Waya:  + 86-574-62268512