Metric Hydraulic Fitting Dzesidede Mɔfiame: Ka, 24 ° Cones kple L / S Series

Wometsɔa ka ƒe didime ɖeɖeko dea dzesi metric hydraulic fittings o. Kadodo eve ateŋu anye wo ame evea siaa kple metrik ka eye wogawɔa ɖeka kokoko o elabena woƒe kɔkɔme, nutrenu mo, tube gota didime alo fitting series to vovo. Kadodo aɖe ate ŋu aƒo ƒu atrɔ zi geɖe evɔ wòado kpo nutrenu si wowɔ be wòawɔ la wɔwɔ.

Mɔfiame nyui sia ɖe alesi woade dzesi metrik-hadrolik-nu si womenya o hafi abia be woaɖɔlii la me. Eléa ŋku ɖe nyatakaka siwo wòle be woadze le nuƒlebiabia alo nɔnɔmetata me ŋu: kadodo ƒomevi, ŋutsu alo nyɔnu ƒe nuwuwu, ka ƒe lolome kple eƒe kɔkɔme, nutrenu ƒe nɔnɔme, mɔ̃a ƒe gota didime, tsiatretsitsi si le bɔbɔe alo kpekpe, nusi wotsɔ wɔe kple nɔnɔme si sɔ.

Dedienɔnɔ ŋuti nyatakaka: Mègaɖe asi le nusi wotsɔ blaa nu ŋu alo lé ŋku ɖe eŋu gbeɖe ne wole tsi ƒom ɖe hadrolik-mɔ̃ aɖe nu o. Ðe mɔ̃a ɖe vovo, ɖe asi le nyaƒoɖeamenu si wodzra ɖo ŋu eye nàwɔ ɖe dɔwɔnua wɔla ƒe dedienɔnɔ ƒe ɖoɖo dzi. Dzidzenuwo kple fotowo nye dɔwɔnu siwo wotsɔ dzroa nu me; ele be woalé ŋku ɖe nusi sɔ mamlɛtɔ ŋu le dzidzenu alo adzɔnuwo ƒe nɔnɔmetata si sɔ nu.

Nukae 'Metric Hydraulic Fitting' Gblɔ Nyateƒee?

'Metric' ɖɔ kadzidzenu ƒe ɖoɖoa. Medea dzesi alesi kadodoa xea mɔe le eɖokui si o.

Woate ŋu azã metrik ka kple:

• cone tube ƒe kadodo si ƒe didime nye dzidzenu 24;

• lãɖeɖe ƒe asigɛ ƒe ƒuƒoƒo;

• cone si ƒe didime nye dzidzenu 24 si ŋu O-ring kpena ɖo;

• metric stud ƒe nuwuwu si ŋu elastomeric seal le;

• mo si le gbadzaa si wotsɔ nutrenu ɖo;

• nut si wotsɔna trɔa asi le nu ŋu; alo

• kadodo si ku ɖe adzɔnuwɔƒe aɖe koŋ ŋu.

Esia tae biabia abe 'M18 fitting' ene mede blibo o. Nyatakaka si ŋu viɖe le aɖɔ kadodo bliboa—le kpɔɖeŋu me, ka si wodzidze, eƒe kɔkɔme, nutrenu ƒe nɔnɔme, mɔ̃a ƒe OD kple nusiwo kplɔ wo nɔewo ɖo—emegbe aɖo kpe edzi le nɔnɔmetata aɖe nu.

Dɔwɔnu Siwo Hiã Be Woade Dzesi

Ne èdi be yeakpɔ nuwo me dzodzro gbãtɔ si ŋu kakaɖedzi le la, dzra ɖo ɖe:

• vernier alo digital caliper si le dzadzɛ;

• metrik-ka ƒe kɔkɔmedzidzenuwo;

• inch thread-pitch gauges hena tsɔtsɔ sɔ kple wo nɔewo;

• avɔ nyui si me kɔ eye wòle dzadzɛ si me lãgbalẽ mele o;

• straightedge alo cone-seat gauge le afisi wòle;

• mating fitting, port alo tube ne woate ŋu alé ŋku ɖe eŋu dedie; kple

• nudzrala la ƒe agbalẽdzraɖoƒe alo didime ƒe nɔnɔmetata.

Mègazã dzidzenu abe dzidzenu ɖeka kolia ene o. Vovototo suesuesue siwo le woƒe didime alo woƒe kɔkɔme me ate ŋu ama kaƒome eve siwo mewɔ ɖeka o la dome.

Afɔɖeɖe Adre ƒe Dzesidede Dɔwɔna

Afɔɖeɖe 1: Ŋlɔ Fitting Blibo la ɖi

Hafi nàdzidzee la, ɖe foto akpa bliboa tso dzogoe siwo wu ɖeka dzi. Ŋlɔe nenye be enye adapter dzɔdzɔe, abɔta, tee, bulkhead, plug alo hose fitting. De dzesii be kadodo ɖesiaɖe wu enu ɖe ​​vovo; adapter ate ŋu aƒo dzidzenu kple lolome vovovo eve nu ƒu.

Ne akpa ƒe xexlẽdzesi alo ewɔla ƒe dzesi si woate ŋu axlẽ le nusi wotsɔ blae la ŋu la, ke ŋlɔe ɖi hafi nàkɔe. Akpa ƒe xexlẽdzesi si sɔ ate ŋu aɖe vi wu dzedzeme ɖeɖeko.

Afɔɖeɖe 2: De dzesi Ŋutsu alo Nyɔnu kple Parallel alo Tapered

Ŋutsu ƒe kadodo aɖe ƒe gotagome kawo le esi; nyɔnu ƒe kadodo aɖe ƒe ka ememetɔwo le esi. Emegbe nàlé ŋku ɖe eŋu be ka la sɔ kple wo nɔewo alo wòle tsɛ hã.

Zi geɖe la, ka siwo wotsɔa metric tube-fitting la sɔna kple wo nɔewo. Ne ka ƒe didime trɔna wòdzena le eƒe didime nu la, mègasusu be enye metrik 24-degree kadodo o. Ate ŋu anye pɔmpi ƒe ka si le tsɛ alo ƒome bubu si hiã be woazã mɔ bubu si dzi woato ade dzesii.

Afɔɖeɖe 3: Lé ŋku ɖe Nutrenu ƒe Anyigba ŋu

Kpɔ kaawo to eŋu eye nàde dzesi anyigba si dzi wowɔa nyaƒoɖeamenu ƒe nutrenua. Kpeɖodzi siwo bɔ dometɔ aɖewoe nye:

• cone si ƒe didime nye dzidzenu 24 le ememe;

• ƒomedodo ƒe ʋuƒo si ŋu O-ring le;

• lãɖeɖe ƒe asigɛ kple tube nut;

• O-ring si te ɖe ŋutsu ƒe ka si wotsɔna ƒoa ka ƒe gɔme ŋu;

• mo gbadza alo nutrenu si wobla; alo

• nutrenu ƒe mo aɖeke mele vovo o, si ate ŋu afia be ka si le gbadzaa ƒe ɖoɖo aɖe le eŋu.

Zi geɖe la, kaawo naa ŋusẽ si wotsɔ blaa nu. Cone, O-ring, cutting ring alo washer ye nye nusi xea kadodoa nu ŋutɔŋutɔ.

Afɔɖeɖe 4: Dzidze Ka ƒe Kekeme

Zã caliper la le ŋutsu ƒe ka dzadzɛ aɖe ƒe tawo dzi. Le ka nyɔnu gome la, dzidzedze tẽe mede pɛpɛpɛ o, eyata tsɔ caliper ƒe nuxexlẽ kple gbeɖiɖidzidzenu kple mating-part geometry ƒo ƒu.

Ŋlɔ asixɔxɔ si wodzidze la ɖi tsɔ wu be nàƒoe ɖe enu enumake wòaɖo lolome si wonya nyuie si woyɔna be. Nutsyɔtsyɔ ƒe titrime, eƒe vuvu, caliper ƒe nɔƒe kple dzidzenu ate ŋu atrɔ nuxexlẽa vie.

Ŋlɔ emetsonua ɖe nɔnɔme si woate ŋu ake ɖe eŋu me, abe:

Ŋutsu ka ƒe gota didime ƒe didime anɔ abe ___ mm ene

Afɔɖeɖe 5: Dzidze Ka ƒe Kɔkɔme

Metric pitch nye didime si le milimeta me tso ka ƒe ta ɖeka dzi yi bubu dzi. De metrik-dzidzenu ƒe aŋgba ɖe ka dzadzɛa ŋu eye nàkpɔe ɖa be aɖuawo le anyi bliboe dometsotso aɖeke manɔmee.

Mègatɔtɔ metrik ƒe gbeɖiɖi kple ka siwo le inch ɖeka me o. Ne kakaɖedzi mele alesi wòsɔe ŋu o la, tsɔ metrik kple inch dzidzenu siaa sɔ kple wo nɔewo. BSP, JIC/SAE kple metric kadodo siwo sɔ kple wo nɔewo le nukpɔkpɔ me ateŋu ahe vodada xɔasiwo vɛ ne wosusu gbeɖiɖi ƒe kɔkɔme.

Ne woɖo kpe lolome dzi la, woŋlɔa metrik ka ɖe nɔnɔme abe Mxx × gbeɖiɖi ƒe kɔkɔme ene ; akpa eveawo siaa hiã.

Afɔɖeɖe 6: Dzidze Tube la ƒe Gome Diameter

Le metrik 24-degree tube kadodo gome la, tube ƒe gota didime nye dzesidenu vevitɔ. Dzidze mɔ̃a ŋutɔ le afisi wòanya wɔ le, ke menye nut alo ŋutilã si wotsɔ ɖo eŋu o.

Ðewohĩ ka ƒe lolome ɖeɖe mate ŋu ade vovototo tube ƒe kadodo si woɖo kple esiwo kplɔ wo nɔewo ɖo dome o. Ŋlɔ tube OD la kpe ɖe ka dzidzedze kple nutrenu ƒe geometry ŋu.

Afɔɖeɖe 7: Ðo kpe Nusiwo kplɔ wo nɔewo ɖo kple Nɔnɔmetata dzi

Zi geɖe la, wotsɔa metrik-degree 24-degree tube fittings naa le wo nɔewo yome si me kɔ eye wololo, eye zi geɖe la, woyɔa kpuie be L kple S . Menye atikeawo ƒe kpekpeme ŋuti numeɖeɖe si kplɔ wo nɔewo ɖoe nye ame ŋutɔ tɔ o. Edea dzesi didime ƒome si woɖo ɖe ɖoɖo nu kple eya ŋutɔ ƒe ƒomedodo le tube OD, ka kple kadodo ƒe geometry dome.

Tsɔ nyatakaka siwo katã wodzidze la sɔ kple nudzrala ƒe nɔnɔmetata alo dzidzenu si sɔ. Ne akpa aɖe tsi tre ɖe eŋu la, tɔ eye nàgakpɔe ake tsɔ wu be nàtia akpa si te ɖe ŋuwò wu.

Alesi Metric 24-Degree Cone Connection wɔa dɔe

Wozãa 24-degree kadodo ƒomea geɖe na hadrolik tube kple hose ɖoɖowo. Le alesi wowɔe nu la, kpekpea ate ŋu azã lãɖeɖe ƒe asigɛ, tube ƒe nuwuwu si wowɔ alo O-ring-assisted cone.

Le lãɖeɖe-sigɛ ƒe mɔ̃ ƒe kadodo me la, nut la tsɔa lãɖeɖe ƒe asigɛa yia fitting cone la me le eƒoƒoƒu me. Kplɔ̃a léa mɔ̃a eye wòwɔa akpa aɖe le nutrenua me. Tube dzadzraɖo nyuie, eƒoƒoƒu ƒe ɖoɖo kple edzikpɔkpɔ le vevie ŋutɔ; akpa ɖeka ko ɖɔliɖɔli evɔ womaɖo kpe edzi be esɔ o nye nuwɔna gbegblẽ.

Le O-ring-kpeɖeŋutɔ ƒe nɔnɔme me la, elastomeric nutrenu la nye nutrenu ƒe nɔnɔme si woɖo be woawɔ la ƒe akpa aɖe. O-ring menaa cone alo ka si mewɔ ɖeka o ne menye nenema o la te ŋu trɔna ɖe wo nɔewo ŋu o.

Kekeli (L) vs Kpekpe (S) Series

L kple S siwo kplɔ wo nɔewo ɖo ate ŋu akpɔ gome le metrik 24-degree fitting ƒe dzedzeme bliboa me, gake wonye didime ƒe ɖoɖo vovovowo. Ele be woaɖo tsiatretsitsi nyuitɔ tso tube OD, ka kple didime ƒe nɔnɔmetata si woƒo ƒu me.

Ƒo asa na susu siawo:

• dzogoe ade si lolo wu fia le eɖokui si be S series;

• nut si ƒe dzedzeme sɔ la fia be woate ŋu atrɔ kpekpe bliboa;

• ka ƒe didime si sɔ ɖo kpe edzi be cone kple tube ƒe lolome sɔ; alo

• woate ŋu atsɔ akpa aɖe ayi L kple S ɖoɖowo dome elabena woate ŋu ablae sesĩe.

Ne nusi wotsɔ blae xoxo aɖe gblẽ alo wotsaka kple akpa siwo womenya o la, tsɔe sɔ kple nusi ŋu woɖo kpee tsɔ wu be nàɖo ŋu ɖe nut ɖeka si le gbadzaa ŋu.

Metric Fitting Shapes kple Nuwuwu ƒe Ƒuƒoƒowo

Ne ède dzesi kadodoa vɔ la, gblɔ ŋutilã ƒe ɖoɖo:

• Adapter dzɔdzɔe: ƒoa nugbɔ eve nu ƒu ɖe axa ɖeka dzi.

• Abɔta: etrɔa mɔ, zi geɖe la, etrɔa dzidzenu 45 alo 90.

• Tee: wɔa alɔdzedɔwɔƒe ƒe kadodo.

• Bulkhead: toa eme eye wòdona ɖe panel aɖe dzi.

• Adjustable stud fitting: ɖea mɔ na orientation hafi mamlɛtɔ tightening.

• Swivel connection: ɖea mɔ be woaƒo wo nu ƒu evɔ womatrɔ hose alo tube la o.

• Plug alo cap: tua ŋutsu alo nyɔnu ƒe nuwuwu si woɖo ɖi.

Vodada Siwo Bɔ Le De dzesi Nu

Yɔyɔ na Milimeta Ðesiaɖe Dzidzedze 'Metric'.

Caliper ɖea milimeta fiana metsɔ le ka ƒe ɖoɖoa me o. Ne wodzidze ka si ƒe didime nye inch le milimeta me la, metrɔnɛ wòzua metrik ka o. Ðo kpe gbeɖiɖi ƒe sesẽme kple eƒe nɔnɔmetata dzi.

De dzesii tso Ka ƒe Kekeme Ko

Diameter nye kpeɖodzi ɖeka ko. Ele be gbeɖiɖi ƒe kɔkɔme, nutrenu mo, tube OD kple series nalɔ̃ ɖe edzi. Kadodo si dzea egɔme kple asi menye kpeɖodzi be esɔ o.

BSPP tɔtɔ kple Metric Parallel Thread

Wo ame evea siaa ate ŋu adze abe ɖe wosɔ ene eye woƒe didime ate ŋu asɔ. Woƒe ka ƒe nɔnɔme, woƒe kɔkɔme kple nutrenu ƒe ɖoɖo siwo do ƒome kplii la to vovo. Zã gbeɖiɖidzidzenu nyuitɔ eye nàlé ŋku ɖe nutrenua ŋu.

JIC tɔtɔ kple Metric Cone

JIC zãa ka dzɔdzɔe si ƒe didime nye inch kple dzoxɔxɔ ƒe nutrenu si ƒe didime nye dzidzenu 37. Metrix ƒe kadodo si ƒe didime nye dzidzenu 24 zãa geometry vovovowo. Nɔnɔme bliboa ƒe nɔnɔme si sɔ mena be woate ŋu atrɔ wo nɔewo o.

Aɖabaŋeŋe ƒu Mating Half dzi

Ðewohĩ ŋutsu ƒe fitting ɖeɖe dzaa maɖe kpekpe bliboa afia o. Lé ŋku ɖe nyɔnu ƒe zikpui, melidzeƒe, mɔ̃, nut, ring kple O-ring ƒe ɖoɖoa ŋu ɣesiaɣi si wòanya wɔ.

Nutrenu ƒe Akpa Siwo Gblẽ Zazã Gbugbɔgazã

Cone siwo ƒoƒo, lãɖeɖe ƒe asigɛ siwo gblẽ, O-kpẽ siwo le gbadzaa kple ka siwo gblẽ ate ŋu ana tsi nado ne ŋkɔ me nya si wogblɔ la sɔ gɔ̃ hã. Dzesidede ame kple nɔnɔmea me dzodzro nye afɔɖeɖe vovovowo.

Nyatakaka Siwo Nàɖo Ne Wobia Be Woatsɔ Aɖɔli

Ele be nyabiase bliboa nanye:

Le nudɔdɔ siwo wotsaka gome la, zã fli ɖeka le ɖoɖo tɔxɛ ɖesiaɖe me. Ƒo asa na numeɖeɖewo abe 'mesɔ kple foto' negbe ɖe wotsɔ kpɔɖeŋu si ŋu woɖo kpee kple didime veviwo hã na hafi.

Fotowo Me Dzodzro ƒe Ŋkɔgbalẽvi Si Ŋu Ŋusẽ Le

Ne èdi be yeanya nu tso adzɔge ʋĩi ŋu la, ɖo:

1. foto ɖeka si me wotsɔ nusi wotsɔ blae bliboae le nudanu aɖe xa;

2. foto ɖeka si woɖe tẽe le mo ɖesiaɖe si wotre nu;

3. foto ɖeka si ɖe caliper la fia le ŋutsu ƒe ka la dzi;

4. foto ɖeka si ɖe gbeɖiɖidzidzenu si bɔbɔ nɔ ka la me fia;

5. foto ɖeka si nye tube, nut kple ring ƒe ɖoɖo; kple

6. akpa ƒe xexlẽdzesi ɖesiaɖe si woate ŋu axlẽ, dzeside alo nɔnɔmetata gbãtɔ.

Zã nɔnɔmetata ɖaɖɛ siwo me kekeli le nyuie eye nàdzra asisiwo ŋuti nyatakaka ɣaɣlawo ɖo ɖe fotoa godo alo nàtrɔ asi le wo ŋu hafi nàɖo wo ɖa.

Nya Siwo Wobia Enuenu

Ðe metrik hadrolik-mɔ̃wo katã nye 24-degree cone-fittings?

Ao, wozãa metrik-kawo kple nutrenu geɖe. De dzesi nutrenu mo kple srɔ̃ɖeɖe ƒe akpaa ɣesiaɣi.

Ðe mate ŋu ade dzesi L alo S series tso ka la ɖeɖeko mea?

Menye kakaɖedzitɔe o. Kpe ƒomedodo si le ka ƒe lolome, eƒe kɔkɔme, tube ƒe gota didime kple didime ƒe nɔnɔmetata si sɔ dome dzi.

Ðe metrik-fitting sɔ ne etsɔ ga ƒo ɖe melidzeƒea?

Ao, ka ƒe akpa aɖe ƒe ƒoƒo meɖoa kpe gbeɖiɖi ƒe kɔkɔme, ka ƒe nɔnɔme alo nutrenu ƒe nɔnɔme si sɔ dzi o. Ne èzi kadodo si mesɔ o dzi la, ate ŋu agblẽ nu le akpa eveawo siaa ŋu.

Ðe wòle be woatsɔ ka ƒe nutrenu asisi ɖe cone ƒe kadodo si ƒe didime nye dzidzenu 24 ŋua?

Wotrɔ asi le 24-degree nutrenu ƒe ƒomedodoa ŋu ƒo xlã eƒe cone, ring alo O-ring ɖoɖo si woɖo ɖi. Mègazã nutrenu atsɔ aɖɔli akpa siwo sɔ alo nutrenu ƒe mo si megblẽ o o. Wɔ ɖe mɔfiame siwo le fitting-wɔla ƒe kpekpe ŋu dzi.

Mɔ kae le kabakaba wu si dzi nàto axɔ nyayɔyɔ si de pɛpɛpɛ?

Na akpaa ƒe xexlẽdzesi alo nɔnɔmetata gbãtɔ ne eli. Ne menye nenema o la, ɖo dzidzenu bliboa kple fotowo ƒe ƒuƒoƒo, tube alo hose data, nu, agbɔsɔsɔme kple dɔwɔwɔ ƒe nudidiwo ɖa.

Dzɔtsoƒe Metric Hydraulic Fittings kple Nyatakaka siwo me kɔ

Ruihua Hardware naa metric hydraulic adapters, hose fittings kple kadodo ƒe akpa siwo do ƒome kplii le dzɔdzɔe, abɔta, tee, bulkhead kple mixed-end ɖoɖowo me. Dzro míaƒe... hadrolik-mɔ̃ siwo wotsɔna trɔa asi le nu ŋu, hadrolik hose ƒe nuzazãwo kple metric hydraulic hose ƒe ɖoɖowɔwɔ ƒe mɔfiala.

Ne èdi kadodo ƒome bubuwo ŋuti nyatakaka kpui aɖe la, xlẽe Woɖe Hydraulic Fitting Ƒomeviwo Me . Ne èhiã kpekpeɖeŋu be wòasɔ kple akpa aɖe si li xoxo la, . te ɖe Ruihua Hardware ŋu kple ka ƒe dzidzenuwo, nutrenu-mo ƒe fotowo, tube alo hose data kple agbɔsɔsɔ si hiã. Míaƒe ƒuƒoƒoa ate ŋu ato nyatakakaawo me asɔ kple nɔnɔmetata siwo li hafi ayɔ nya tso wo me.