Nukpɔkpɔwo: 0 Agbalẽŋlɔla: Lynn Liu Tata Ɣeyiɣi: 2026-09-30 Dzɔtsoƒe: Teƒe
Hadrolik-ka si wòle be wòatso tsigoe ƒe gli, xɔtunu ƒe agbalẽvi alo manifold-kpa dzi la hiã na mɔ si wotre be wòato eme. 6C metric bulkhead fitting wɔa dɔ ma kple 24° cone light series nuwuwu eve, siwo wotu ɖe DIN 2353 kple ISO 8434-1 dzi. Mɔfiame sia ƒo nu tso lolome ƒe didime, ka ƒe xexlẽdzesi, nyaƒoɖeamenu ƒe dzidzenuwo kple doa dzadzraɖo si hiã hafi woaɖoe ŋu.
6C nye bulkhead union dzɔdzɔe si ƒe metric male 24° cone nuwuwu le axa eveawo. Nuwuwu eveawo siaa zãa kekeli ƒe kplɔ wo nɔewo ɖo (L series) ƒe didime siwo le DIN 2353. Ŋutilãa tsɔa akpa si didi wu si ŋu ka le kple hex ale be woate ŋu ablae to ʋuƒo si me wotsɔa gaƒoɖokui ƒoa nui dzi.
Nuwuwu ɖesiaɖe trea nu abe alesi metrik compression fitting si wozãna ɖaa ene. Tube la ƒua du yia cone la me. Lãɖeɖe ƒe asigɛ aɖe ɖua mɔ̃a ƒe gli ne wobla nut la sesĩe. Ga kple ga ƒe kadodo si le 24° cone lae wɔa nutrenua. O-ring aɖeke menɔa tsi ƒe mɔa dzi o, eyata elastomer aɖeke meli si atsi o.
Ne wometsɔ xɔtunu aɖeke ɖo eŋu o la, mɔ̃ aɖe tɔa ɖe ʋuƒoa ƒe akpa ɖeka alo toa do ƒuƒlu aɖe me. Tiatia eveawo siaa do kpo nu le subɔsubɔdɔa me:
Do ƒuƒlu aɖe nana mɔ̃a ƒua du ɖe ga gbadzɛwo ŋu vaseɖe esime gli la naƒu eye ka la nagbã.
Hose aɖe si wotsɔ ƒo xlã ʋuƒoa tsɔa ka eve bubuwo kpena ɖe eŋu kple teƒe eve bubu siwo me tsi sina tona.
Nusi wotsɔ ka blae ɖe ʋuƒoa ƒe gli ŋutɔ me tsɔa agba si katã le ka la dzi be wòabɔbɔ.
Bulkhead fitting ɖea kuxi etɔ̃awo katã ɖa. Ŋutilãa xɔa agba si wotsɔ blaa nu la. Tube la gena ɖe eme hedona to cone ƒe kadodo siwo wotu nu ɖo me. Kadodo siwo le fli me ƒe xexlẽme metrɔna o.
24° cone ƒe nuwuwu eve. Kekeli ƒe nɔnɔme si kplɔ wo nɔewo ɖo le akpa eveawo, eyata mɔ̃ eveawo siaa zãa lãɖeɖe ƒe asigɛ ƒome ɖeka.
Through-panel ka si wotsɔna ƒoa ka. Ŋutilã ƒe ka didi ale gbegbe be woate ŋu awɔ panels, frame plates kple tank walls tsɛwo.
Hex na counter-holding. Amesi dea eme la tsɔa spanner léa ŋutilãa ɖe akpa ɖeka eye wòtrɔa locknut la ɖe akpa kemɛ. Ŋutilãa metrɔna ne wole kɔnua bɔbɔm o.
Ðo agbalẽɖoɖoɖa. Nutsetsewo kple lãɖeɖe ƒe asigɛwo ɖoa meli kple ŋutilãa, siwo sɔ kple esiwo sɔ ɖe wo nɔewo yome.
Ŋutilã si wotsɔ mɔ̃ wɔe. Wotsoa cone la ɖe CNC lathe dzi, ke menye ɖe wotsɔe ƒu gbe o. Cone finish ɖua avifafa dzi le nyaƒoɖeamenu ƒe gasɔdodo te.
Nu |
Asixᴐxᴐ |
|---|---|
Dzidzenu |
DIN 2353, ISO 8434-1 ƒe ƒomedodo |
Siwo kplɔ wo nɔewo ɖo |
Kekeli ƒe ƒuƒoƒo (L) . |
Nutrenu ƒe nɔnɔme |
24° cone kple lãɖeɖe ƒe asigɛ |
Ŋutilã ƒe nuzazãwo |
Carbon steel C45, si wohe le vuvɔ me alo wotsɔe ƒo dzoe |
Nusiwo wotsɔ ƒoa nui |
Zn-Ni ƒe akɔbli, 8-12 μm, 240+ h dze sisi (ASTM B117) . |
Nya siwo woate ŋu awɔ le wo ɖokui si |
Ga si mexɔ dzo o 316L na ƒudzi alo atikewɔdɔ |
Dzoxɔxɔ ƒe didime |
−40 °C va ɖo +120 °C (NBR), −40 °C va ɖo +150 °C (FKM) . |
Dɔwɔwɔ ƒe nyaƒoɖeamenu |
315 bar vaseɖe 18 mm tube; 160 bar tso 22 mm (static, 4:1 dedienɔnɔ ƒe akpa) |
Wotsɔe na abe alesi |
Ŋutilã, nuku eve, lãɖeɖe ƒe asigɛ eve |
Nusiwo do ƒome kplii 6E metric ŋutsu O-ring bulkhead fitting tsyɔa mɔfiame dɔ ma ke ne melidzeƒea ƒe akpa hiã ISO 6149 O-ring nutrenu ɖe cone teƒe.
Tube OD (mm) ƒe . |
Ka |
Do si wokafu be woatsɔ awɔ panel (mm) . |
Dɔwɔwɔ ƒe nyaƒoɖeamenu (bar) . |
|---|---|---|---|
6 |
M12 x 1.5 ƒe didime |
13 |
315 |
8 |
M14 x 1.5 ƒe didime |
15 |
315 |
10 |
M16 x 1.5 ƒe didime |
17 |
315 |
12 |
M18 x 1.5 ƒe didime |
19 |
315 |
15 |
M22 x 1.5 ƒe didime |
23 |
315 |
18 |
M26 x 1.5 ƒe didime |
27 |
315 |
22 |
M30 x 2 ƒe didime |
31 |
160 |
28 |
M36 x 2 ƒe didime |
37 |
160 |
35 |
M45 x 2 ƒe didime |
46 |
160 |
42 |
M52 x 2 ƒe didime |
53 |
160 |
Panel do ƒe asixɔxɔwo ɖea mɔ 1 mm ƒe ʋuʋu le ka gã la ƒe didime dzi. Dzi vovototoa ɖe edzi ne wota ʋuƒoa, wotsɔ galvanized wɔe alo ne nu eve siwo wotsɔ blaa nu ɖekae la wɔ ɖeka kple xɔtunu ɖeka.
Kpɔ panel la ɖa. Ele be eƒe anyigba nanɔ gbadzaa le afisi locknut kple washer ƒe zikpui le. Do ŋusẽ agba tsɛ aɖe kple megbekplu.
Ku doa alo nàƒoe. Zã clearance si le lolome ƒe nɔnɔmetata me. Deburr mo eveawo siaa. Burr aɖe léa washer la ɖa le edzi eye wòdzea mɔ si dzi tsi sina tona la gɔme.
Wòasɔ ɖe ŋutilãa nu. Gbugbɔ ŋutilãa to eme tso tsigoe alo mɔ̃a ƒe akpa dzi. De washer kple locknut la tso gota.
Kpe locknut la sesĩe. Lé hex la kple spanner ale be ŋutilãa mate ŋu atrɔ o. Klɔ locknut la nyuie, emegbe nàna wòatrɔ zi enelia mamlɛtɔ.
Dzra mɔ̃ eveawo siaa ɖo. Lã dzogoe ene me, deburr eme kple egodo, eye nàtsɔ nut kple lãɖeɖe ƒe asigɛa aƒu gbe ɖe edzi eye lãɖeɖea ƒe nugbɔ nadze ŋgɔ tube la ƒe nuwuwu.
Ðo anyi ɖe cone la dzi. Si ami ɖe cone kple ring la ŋu, tsɔ asi bla nut la, de dzesii, emegbe nàtrɔe 1.5 na kekeli siwo kplɔ wo nɔewo ɖo.
Nyaƒoɖeamenu dodokpɔ. Na nutome suea naɖo dɔwɔwɔ ƒe nyaƒoɖeamenu me eye nàlé ŋku ɖe ʋuƒoa ƒe akpa eveawo ŋu be ele avi fam hã hafi mɔ̃a natrɔ ayi dɔme.
Tsidzraɖoƒewo. Trɔgbɔ kple numimɔ̃ siwo gena ɖe eme to aʋawɔʋua ƒe gli me.
Asitelefon dzi dɔwɔnuwo ƒe xɔtunuwo. Fli siwo tso mɔ̃a ƒe teƒea yi boom alo chassis la gbɔ.
Valve manifolds kple ŋusẽ ƒe agbawo. Panel plates le compact hydraulic units dzi.
Agbledede ƒe mɔ̃wo. Tank kple frame ƒe mɔ siwo to traktwo kple nuŋemɔ̃wo dzi.
Mɔ̃ siwo wozãna le dɔwɔƒewo. Presses kple injection molding units siwo me dedienɔnɔdzikpɔlawo le le pɔmpi kple dɔwɔnu dome.
Ruihua Hardware mɔ̃wo DIN 2353 metrik fittings abe nu vevi adzɔnuwo ƒome, eyata bulkhead ŋutilãwo ma dɔwɔnuwo, plating kple ŋkuléle ɖe ɖoɖowɔɖiwo kple metrik ƒe hatsotso susɔea. Ema nana be nuwo didi nɔa bɔbɔe le nudɔdɔ siwo wotsaka me.
C45 carbon gakpo abe dzidzenu ene, kple 316L si mexɔ dzo o si woyɔ ɖe nutata ŋu.
Zn-Ni plating kple gaƒoƒo 240 ƒe dze sisi ƒe emetsonuwo li le hatsotso ɖesiaɖe me.
Sets meli bliboe — ŋutilã, nukuwo kple lãɖeɖe asigɛwo tso ewɔwɔ lot ɖeka ma ke.
Ka siwo wowɔ ɖe ɖoɖo nu ƒe ƒuƒoƒo kple ŋutilã ƒe didime siwo woyɔ tso nɔnɔmetatawo alo kpɔɖeŋuwo me.
Tube ƒe gota didime nye 6, 8, 10, 12, 15, 18, 22, 28, 35 kple 42 mm. Kaawo tso M12 x 1.5 va ɖo M52 x 2.
Kuku si lolo wu ka si ƒe didime nye milimeta 1. Burr si wogblẽ ɖe doa ƒe go kemɛ dzi ana washer la nadzo le ʋuƒoa dzi eye wòana tsi nado.
Ɛ̃. Wokafui be woatsɔ nutrenu alo O-ring si wobla ɖe locknut la te le nusiwo wota alo esiwo le gbadzaa dzi.
Ẽ, woyɔ nya tso nutata ŋu. Standard wɔwɔ nye C45 carbon gakpo kple Zn-Ni plating to gaƒoƒo 240 neutral dze sisi ɖe ASTM B117 ɖesiaɖe.
Ɛ̃. Nudɔdɔ na ƒuƒoƒo bliboa ƒoa asa na akpa siwo le bɔbɔe kple esiwo kpekpe siwo kplɔ wo nɔewo ɖo ƒe tsakatsaka.
Na woagblɔ nya aɖe na DIN 2353 bulkhead fittings. Ðo tube ƒe lolome, ka ƒe ƒuƒoƒo, panel ƒe titrime kple agbɔsɔsɔme ɖa. Ruihua Hardware tsɔa akpa ƒe xexlẽdzesi siwo li xoxo la ƒoa ƒu eye wòtrɔa nya si woyɔ la le gaƒoƒo 24 me. Kpɔɖeŋu siwo ƒe lolome le vovovo la li hena wo me dzodzro.
