1' Flat-Face Hydraulic Coupler Ngwa ngwa ngwa (ISO 16028) - ụdị niile | 250 Ogwe nrụgide dị elu

Usoro a nke 1 ' ewepụghị ihu hydraulic ngwa ngwa couplers na-agbaso ụkpụrụ  ISO 16028  mba ụwa, yana 250 mmanya dị elu na-arụ ọrụ nrụgide na ± 230 L / min na-erugharị ọnụego, na-agbanwe na oke okpomọkụ nke -25 ° C ruo + 100 ° C. Ịkwado push-njikọ na bọl ụlọ retraction kwụsịrị imewe maka mfe na-arụ ọrụ nke ọma platero trival, zinc di na nwunye na-arụ ọrụ nke ọma. dakọtara na NBR (roba nitrile) akara mgbanaka na PTFE mgbochi extrusion mgbanaka iji hụ na ntapu-àmà na kwụsiri ike n'okpuru nnukwu nrụgide dị na  nwoke, nwanyị (1' NPT / M30x2) na zuru ezu (dual-thread)  ụdị izute gị ụlọ ọrụ hydraulic usoro njikọ mkpa.

Nkọwapụta

• Nrụgide ọrụ : 250 Bar

• Okpomọkụ na-arụ ọrụ : -25°C ruo +100°C

• Ọnụego mgbaba : ± 230 L/min

• Ngwunye elu : Trivalent Zinc Plated (corrosion & wear resistant)

• Ihe mkpuchi : NBR (Nitrile Rubber) - mmanụ na-eguzogide mmanụ, ezigbo akara

• Mgbanaka mgbochi extrusion : PTFE - na-egbochi extrusion akara n'okpuru nrụgide dị elu

• Sistemụ mkpọchi : bọọlụ igwe a na-egbu maramara (njikọ echekwara, mgbochi ịtọpụ)

• Nkwenye : ISO 16028 International Standard

  
  

• 5173 (Nwoke | 1' NPT)

• 107.1 mm n'ozuzu ogologo na 1 ″-11.5 NPT nwoke eri na 55 mm wrench size; otu mmebe njedebe nwoke maka njikọ kpọmkwem na akwa akwa hydraulic nwanyị, nke dị mma maka njikọ njedebe hydraulic nke nwoke.
• 
  

• 5174 (Nwanyị | 1'NPT)

• Kọmpat 100.2 mm n'ogologo ya na eri nwanyị 1 ″-11.5 NPT na nha nha nwanyị 50 mm; Nhazi nchekwa ohere, nke zuru oke maka akụrụngwa hydraulic nwere oghere nrụnye nwere oke yana ihe achọrọ 1 'NPT.
• 
  

• 5179 (Nwanyị | M30x2)

• 121.2 mm n'ozuzu ogologo na M30x2 nwanyi eri na 50 mm nwanyi wrench size; Model raara onwe ya nye maka sistemu hydraulic ụlọ ọrụ nwere nkọwapụta eriri M30 × 2, dabara kwụ ọtọ na enweghị ntapu.
• 
  

• 5175 (zuru oke | 1'NPT Nwoke & Nwanyị)

• 185.5 mm n'ogologo ya na okpukpu abụọ 1 ″-11.5 NPT nwoke / nwanyị, 55 mm nwoke na 50 mm nha eriri akwa nwanyị; imewe eriri abụọ na-agbanwe agbanwe, na-ewepụ mkpa maka nkwụnye ọzọ, dabara adaba maka njikọ njikọ hydraulic na-agbanwe agbanwe.
• 
  

• Ntuziaka ọrụ dị mfe

• Njikọ : Tinye nwoke na nwanyị n'ime nwanyị nwanyị n'okpuru nrụgide - mkpọchi akpaka site na bọọlụ nchara na-egbuke egbuke maka njikọ ngwa ngwa.

• Mwepu : Kwuo ụlọ bọọlụ mbụ, wee weghachi aka aka ka ịhapụ mkpọchi - nkwụpụ dị mma ma dị mfe na-enweghị enyemaka nrụgide.

• Uru ihe onwunwe adịchaghị

• Trivalent Zinc Plating : mkpuchi elu dị elu, nguzogide siri ike na nchara na eyi ụlọ ọrụ, na-agbatị ndụ ọrụ ngwaahịa site na 50%+.

  NBR Akara : Mmanụ mara mma, ihe mgbaze na nguzogide ịka nká, na-adaba na mgbasa ozi hydraulic niile (mmanụ hydraulic, mmanụ ịnweta mmanụ, wdg).

  Mgbanaka Mgbochi PTFE : Igwe ọkụ dị elu na nguzogide nrụgide, na-egbochi mgbanaka mgbanaka mgbanaka / extrusion, na-eme ka nkwụsi ike akara ogologo oge.

  Bọọlụ igwe a na-egbu maramara : ike siri ike na elu dị larịị, kpochidoro nke ọma, enweghị mkpọchi n'oge ọrụ.

• Ihe ngosi ngwa sara mbara

• Kwesịrị ekwesị maka   sistemu hydraulic ụlọ ọrụ, igwe ihe owuwu, akụrụngwa ugbo, nkeji ike hydraulic, igwe Ngwuputa, na ahịrị mbufe mmiri nke ụlọ ọrụ ; dị mma maka njikọ ngwa ngwa / nkwụsị nke ahịrị hydraulic na nrụgide dị elu, ọnọdụ ọrụ dị elu.