00710 PTFE Hose Ferrule — Ki wɔd dɛn ɛn abstrekt dɛn

Wan mɛtal sliv we de lɔk di fitin pan PTFE (Teflon) hos we dɛn de krimp. Sɛvin saiz dɛn. Standart kabɔn stɛl, zink plet. Fit SAE 100R14 hos ɛn kɔmɔn krimp mashin dɛn.

Wetin Na PTFE Hose Fɛrul?

Fɛro na shɔt mɛtal sliv we de sidɔm bitwin di PTFE hose fitin  tel ɛn di hos breyd. We yu rɔn di asɛmbli tru wan krimp mashin, di fɛrul de kɔmprɛs ɔl tu di layers dɛn rawnd di fitin bɔdi. Di rizulyt na wan jɔyn we de sial ɔnda prɛshɔn ɛn we nɔ de pul am.

PTFE (polytetrafluoroethylene) hos — we dɛn kin kɔl bak Teflon hose — de handle ay tɛmpracha, agresiv kemikal, ɛn strikt klin rikwaymɛnt. Bɔt PTFE na wan tin we smol, we nɔ gɛt frikshɔn. If yu nɔ gɛt fɛru we de ol di breyd ɛn di tel we fit am togɛda, di hos kin slip ɔnda lod.

Di  00710 siriɔs  kɔba sɛvin standad DASH saiz frɔm -06 (DN10) to -32 (DN50). Ɛni saiz de mach di kɔrɛspɔndɛns haydrolik hos fitin  ɛn PTFE hos OD, so yu pik di sem DASH nɔmba fɔ ɔl di tri pat dɛn.

00710 Seri Spɛsifikeshɔn dɛn

Ful Sayz Chɔt (DN10 – DN50) .

Tip fɔ pik:  Kɔnfɛm yu hos DASH saiz fɔs. Di ferrule DASH fɔ mach di hos DASH ɛn di fitin DASH. Ɔl di tri pat dɛn de yuz di sem -06, -08, -12 ... -32 nɔmba.

Matirial ɛn Surface Tritmɛnt

• Bes matirial:  Kol-drɔ kabɔn stɛl (SAE 1010 / 1020 ikwal). Gud tɛnsiɛl trɛnk ɛn daktiliti fɔ krimp.

• Standart finish:  Zink pletin (klia ɔ yɔlɔ). I de protɛkt frɔm rɔst na say dɛn we gɛt bɔku bɔku wata ɛn we gɛt ɔyl.

• Opshɔnal finish dɛn:  Nikel pletin, . stenlɛs stiɛl 304 / 316 , ɔ klin (nɔ gɛt pletin) fɔ spɛshal aplikeshɔn dɛn.

Stenlɛs vɛshɔn dɛn fit kemikal transfa layn, fud-grɛd sistem, ɛn marin instɔleshɔn usay sɔl sprɛy na sɔntin we de mɔna pipul dɛn.

Aw fɔ Pik di Rayt Fɛrul

1. Chek yu hos saiz.  Rid di DASH nɔmba we dɛn print na di hos ɔ we de na di hos katalog. Ɛgzampul: SAE 100R14-12 min DASH -12 (DN20).

2. Pik di ferrule we de mach.  Di sem DASH nɔmba. Fɔ -12 hos, ɔda  00710-12.

3. Match di fitin.  Di fitin tel fɔ bi bak DASH -12. Ɔl tri — hos, fɛrul, fitin — sheb wan DASH nɔmba.

4. Pik di say we yu go dɔn.  Zink pletin fɔ jenɛral haydrolik wok. Stenlɛs ɔ nikɛl fɔ kɔros ɔ klin ɛnvayrɔmɛnt.

5. Set op yu krimp mashin.  Instɔl di day sɛt fɔ di fɛrul OD na yu DASH saiz. Si wi krimp gayd  fɔ day sɛtin fɔ ɛni saiz.

Di men tin dɛn we yu fɔ du

Eksakt Sayz Match

Ɛni DASH nɔmba de map to wan DN ɛn lɔng. Nɔ gɛs wok. Hose, ferrule, ɛn fitin de sheb di sem DASH — yu pik wan nɔmba fɔ ɔl tri.

Kabon Stiɛl Kɔr

Kol-drɔ bar de gi tayt tolɛreshɔn pan ID, OD, ɛn kɔnsɛntrisiti. di tik we di fεrul wכl tik kin kכnsist, so krimp fכs de sheb ivin rawnd di hos.

Zink / Nikel / SS Opshɔn dɛn

Standart zink pletin fɔ ɔyl ɛn humid kɔndishɔn dɛn. Nikel ɔ stenlɛs fɔ kemikal, it, ɛn marin. Rikwest plain finish if pletin intafεr wit yu prכsεs.

7 Sayz, Wan Siri

DN10 to DN50 de kɔba di bɔku bɔku industrial PTFE hos asɛmbli dɛn. Stok ɔl di sɛvin DASH saiz dɛn ɛn yu kin bil ɛni standad PTFE layn na di shɔp flo.

Standart krimp mashin fit

Finn-Power, UNIFLEX, ɛn kɔmɔn Chaynish krimp mashin dɛn ɔl de wok wit 00710 fɛrul. Yuz di standad day set fɔ ɛni DASH saiz — nɔ kɔstɔm tul.

Ful Inspekshɔn ɛn Trasibiliti

Ɛvri batch de ship wit dimɛnshɔnal ripɔt ɛn mil sɛtifiket. Opshɔnal sɔl sprɛy, hadnɛs, ɛn ROHS/REACH doks de fɔ ɛkspɔt ɔda.

Aplikeshɔn dɛn

Haydrolik Sistɛm dɛn

Mobayl ikwipmɛnt, injɛkshɔn mold mashin, ship haydrolik steshɔn, ɛn winda tɔbayn pitch sistem ɔl de rɔn PTFE layn fɔ ay-tɛmpracha haydrolik fluid. Di 00710 ferrule de lok di haydrolik hos fitin  pan dɛn layn ya ɔnda wok prɛshɔn te to di hos rayt limit.

Kεmikכl Transfεr

Asid, alkali, ɛn ɔrganik sɔlvɛnt dɛn kin atak rɔba hos frɔm insay. PTFE de resist klos to ɔl di industrial kemikal dɛn. Stenlɛs ɔ nikɛl-plet 00710 fɛrul dɛn kin ol di asɛmbli togɛda insay kɔrosiv plant paip.

Fɔd ɛn Fama

PTFE hos mit FDA ɛn EU it-kɔntakt lɔ dɛn. Stenlɛs 316 fɛrul dɛn de gi wan klin, nɔ-kɔntamin krimp jɔyn fɔ CIP (klin-in-ples) layn dɛn, filin mashin dɛn, ɛn bayɔtek prɔses skid dɛn.

Ɔtomotiv ɛn Rel

Brek layn, fiul vapour rikavari, ɛn pawa stiarin sɛrkyut na motoka ɛn rel motoka dɛn kin yuz PTFE hos fɔ tɛmpracha rɛnj ɛn kemikal rɛsistɛns. Di 00710 fεrul de wok akɔdin to dεn sab-sistεm ya.

Wetin Mek Yu Pik Ruihua Hadwɔd

• 10+ ia na haydrolik fitin.  Wi kin mek fɛrul, fitin, ɛn adapt ɛvride. Di 00710 na wan pan wi standad PTFE ferrule layn dɛn — nɔto katalog foto we nɔ gɛt stok biɛn am.

• Dimensional inspekshɔn pan ɛvri batch.  ID, OD, ɛn lɔng L chɛk bifo dɛn pak. Mill test ripɔt inklud.

• OEM ɛn kɔstɔm ɔda dɛn we dɛn kin aksept.  Difrɛn lɔng, spɛshal finish, prayvet-lɛbul pak — wi bil am to yu drɔin.

• Ɛkspɔt pepa wok rɛdi.  ROHS, REACH, Sɛtifiket fɔ Ɔrijin, ɛn kɔstɔm pak list dɛn we dɛn kin pripia we dɛn aks fɔ am.

• Short lida tɛm dɛn.  Standart zink-plet saiz dεm de ship insay 7–15 dez. Kastom finish in 20–30 dez.

Kwɛstyɔn dɛn we Dɛn kin Aks Bɔku tɛm

Wetin na PTFE hos fɛrul?

PTFE hos fεrul na mεtal sliv we de slayv oba PTFE (Teflon) hos bifo i krimp. di tεm we di krimp prכsεs de, di fεrul de kכmprεs di hos tel εn breyd εgεst di fitin bכdi, we de mek wan sial jכint we de hכl כnda prεshכn εn we de rεsist pul-כt.  Ruihua Hardware  de prodyuz di 00710 siriɔs insay sɛvin saiz frɔm DN10 to DN50 fɔ dis.

Us PTFE hos dɛn de wok wit di 00710 fɛrul siriɔs?

Di 00710 fɛrul dɛn fit SAE 100R14 Tayp A ɛn B PTFE hos ɛn ikwal kɔnstrɔkshɔn dɛn. Match di ferrule DASH saiz to yu hos DASH saiz: 00710-06 fɔ -6 hos (DN10), 00710-08 fɔ -8 hos (DN12), te to 00710-32 fɔ -32 hos (DN50).

Us matirial dɛn mek 00710 fɛrul dɛn wit?

Standard 00710 ferrules na kol-drɔ kabɔn stɛl wit zink pletin fɔ kɔrɛshɔn rɛsistɛns. Stenlɛs stiɛl 304 ɛn 316 vɛshɔn dɛn de fɔ kemikal ɔ it-grɛd layn dɛn.  Ruihua Hardware  kin saplae nikɛl-plet ɔ klin finish bak we yu aks fɔ am.

A kin krimp 00710 ferrules wit wan standad krimp mashin?

Yɛs. Di 00710 ferrules de wok wit Finn-Power, UNIFLEX, ɛn standad Chaynish krimp mashin dɛn. Yuz di day sɛt we de mach di fɛrul ɔta dayamita fɔ yu DASH saiz. No spɛshal tul nɔ nid fɔ de.

Yu de gi matirial sɛtifiket ɛn ɛkspɔt dɔkyumɛnt dɛn?

Ɛvri batch kin ship wit dimɛnshɔnal inspekshɔn ripɔt ɛn matirial sɛtifiket (mil tɛst ripɔt).  Ruihua Hardware  kin gi ROHS ɛn REACH kɔmplians stetmɛnt bak ɛn wan Sɛtifiket fɔ Ɔrijin fɔ ɛkspɔt ɔda. Ɔda tɛst ripɔt dɛn (sɔlt sprɛy, hadnɛs) de we yu aks fɔ.

Wetin na di minimum ɔda kwantiti ɛn di lida tɛm?

MOQ na 500 pis pan wan saiz fɔ standad zink-plet fɛrul. Lid tɛm na 7–15 wok dez fɔ stok tin dɛn ɛn 20–30 dez fɔ kɔstɔm sɔfayz tritmɛnt ɔ stenlɛs stiɛl vɛshɔn. Sampul ɔda fɔ 50–100 pis kin arenj fɔ nyu kɔstɔma dɛn.

Get a Quote fɔ 00710 PTFE Hose Fɛrul

Send wi yu saiz list ɛn kwantiti. Wi kin ansa wit prays, lida tɛm, ɛn shiping kɔst insay 24 awa. Nyu kɔstɔma dɛn — sampul ɔda dɛn we gɛt 50–100 pis dɛn de.

• Imel: ruihua@rhhardware.com

• WhatsApp: +86 137 3604 8924, yu kin yuz am

• Fɔn:  +86-574-62268512