00710 PTFE Hose Ferrule - Keywords & Abstracts

Hannun ƙarfe na ƙarfe wanda ke kulle kayan aiki a kan bututun PTFE (Teflon) yayin crimping. Bakwai masu girma dabam. Standard carbon karfe, zinc plated. Ya dace da bututun SAE 100R14 da injunan crimp na gama gari.

Menene PTFE Hose Ferrule?

A ferrule guntun hannun hannu ne na ƙarfe wanda ke zaune tsakanin PTFE bututu mai dacewa  wutsiya da kuma bututun tiyo. Lokacin da kuke gudanar da taron ta na'ura mai kaifi, ferrule yana matsawa yadudduka biyu a kusa da jikin da ya dace. Sakamakon shine haɗin gwiwa wanda ke rufewa a ƙarƙashin matsin lamba kuma yana tsayayya da cirewa.

PTFE (polytetrafluoroethylene) tiyo - wanda kuma ake kira Teflon hose - yana ɗaukar zafi mai zafi, sinadarai masu haɗari, da ƙa'idodin tsabta. Amma PTFE abu ne mai santsi, ƙarancin juzu'i. Ba tare da ferrule da ke riƙe da ƙwanƙwasa da wutsiya mai dacewa tare ba, bututun yana zamewa ƙarƙashin kaya.

Jerin  00710  ya ƙunshi daidaitattun girman DASH guda bakwai daga -06 (DN10) zuwa -32 (DN50). Kowane girman yayi daidai da daidai hydraulic hose fitting  da PTFE hose OD, don haka za ku ɗauki lambar DASH iri ɗaya don duka sassa uku.

Bayanan Bayani na 00710

Cikakken Tsarin Girma (DN10 - DN50)

Tukwici na zaɓi:  Tabbatar da girman tiyon DASH da farko. Dole ne ferrule DASH ya dace da tiyo DASH da DASH ɗin da ya dace. Duk sassa uku suna amfani da -06, -08, -12 … -32 lamba.

Material da Surface Jiyya

• Base abu:  Sanyi-jawo carbon karfe (SAE 1010/1020 daidai). Kyakkyawan ƙarfi mai ƙarfi da ductility don crimping.

• Daidaitaccen gamawa:  Zinc plating (bayyane ko rawaya). Yana ba da kariya daga tsatsa a cikin yanayi mai laushi da mai.

• Ƙarewar zaɓi:  nickel plating, bakin karfe 304/316 , ko a fili (ba plating) don aikace-aikace na musamman.

Sigar da ba ta dace ba sun dace da layukan canja wurin sinadarai, tsarin abinci, da kayan aikin ruwa inda gishiri ke da damuwa.

Yadda Ake Zaban Ferrule Dama

1. Duba girman bututun ku.  Karanta lambar DASH da aka buga akan bututun ko aka jera a cikin kundin bugu. Misali: SAE 100R14-12 yana nufin DASH -12 (DN20).

2. Zaɓi jirgin ruwan da ya dace.  Lambar DASH iri ɗaya. Domin -12 tiyo, oda  00710-12.

3. Daidaita dacewa.  Dole ne kuma wutsiya mai dacewa ta zama DASH -12. Duk ukun - tiyo, ferrule, dacewa - raba lambar DASH ɗaya.

4. Zaɓi ƙarshen.  Zinc plating don aikin hydraulic gabaɗaya. Bakin ko nickel don gurɓataccen muhalli ko tsaftataccen muhalli.

5. Saita na'urar kurtun ku.  Shigar da saitin mutuwa don ferrule OD a girman DASH ɗin ku. Duba jagorar murkushewa  don saitunan mutu a kowane girman.

Mabuɗin Siffofin

Daidaitaccen Girman Match

Kowane taswirorin lambar DASH zuwa DN guda ɗaya da tsayi. Babu zato. Hose, ferrule, da dacewa suna raba DASH iri ɗaya - kun zaɓi lamba ɗaya don duka ukun.

Carbon Karfe Core

Sanyi-sanyi yana ba da juriya mai ƙarfi akan ID, OD, da mai da hankali. Kaurin bangon ferrule yana daidaitawa, don haka ƙwanƙwasa ƙarfi yana rarraba ko'ina a kusa da tiyo.

Zinc / Nickel / SS Zabuka

Daidaitaccen zinc plating don mai da yanayin danshi. Nickel ko bakin karfe don sinadarai, abinci, da ruwa. Nemi gamawa a sarari idan plating ya kawo cikas ga tsarin ku.

Girma 7, Jeri Daya

DN10 ta hanyar DN50 ya ƙunshi yawancin PTFE tiyo taron masana'antu. Adana duk girman DASH guda bakwai kuma zaku iya gina kowane daidaitaccen layin PTFE akan benen kanti.

Standard Crimp Machine Fit

Finn-Power, UNIFLEX, da injunan crimp na kasar Sin gama gari duk suna aiki tare da ferrules 00710. Yi amfani da daidaitaccen saitin mutuwa don kowane girman DASH - babu kayan aiki na al'ada.

Cikakkun Bincike da Ganowa

Kowane rukuni yana jigilar kaya tare da rahoton girma da takardar shedar niƙa. Zaɓin fesa gishiri, tauri, da ROHS/REACH docs akwai don odar fitarwa.

Aikace-aikace

Na'ura mai aiki da karfin ruwa Systems

Kayan aiki na hannu, injinan gyare-gyaren allura, tashoshin ruwa na ruwa, da tsarin filayen injin iska duk suna gudanar da layin PTFE don ruwan zafi mai zafi. Jirgin 00710 ya kulle na'ura mai aiki da karfin ruwa tiyo dacewa  akan waɗannan layin ƙarƙashin matsi na aiki har zuwa iyakar ƙimar tiyo.

Canja wurin sinadarai

Acids, alkalis, da kwayoyin kaushi suna kai farmaki daga cikin bututun roba. PTFE yana tsayayya da kusan dukkanin sinadarai na masana'antu. Bakin ko nickel-plated 00710 ferrules suna riƙe taron tare a cikin bututun shuka masu lalata.

Abinci da Pharma

PTFE tiyo ya sadu da FDA da EU abinci-lamba dokokin. Bakin ferrules 316 suna ba da haɗin gwiwa mai tsabta, mara lahani don layukan CIP (tsaftace-wuri), injunan cikawa, da skids na sarrafa halittu.

Motoci da Rail

Layukan birki, farfaɗowar tururin mai, da da'irar sarrafa wutar lantarki a cikin motoci da motocin dogo sukan yi amfani da tiyon PTFE don kewayon zafin jiki da juriya na sinadarai. 00710 ferrule yana aiki a cikin waɗannan ƙananan tsarin.

Me yasa Zabi Ruihua Hardware

• Shekaru 10+ a cikin kayan aikin hydraulic.  Muna yin ferrules, fittings, da adaftan kowace rana. 00710 yana ɗaya daga cikin daidaitattun layukan PTFE ɗin mu - ba hoton kasida ba tare da wani haja a bayansa ba.

• Binciken girma akan kowane rukuni.  ID, OD, da tsayi L an duba kafin shiryawa. Rahoton gwajin Mill ya haɗa.

• OEM da oda na al'ada sun karɓa.  Tsawon tsayi daban-daban, ƙarewa na musamman, marufi masu zaman kansu - mun gina shi zuwa zanenku.

• Fitar da takarda a shirye.  ROHS, REACH, Certificate of Origin, da lissafin kwastan da aka shirya akan buƙata.

• Ƙananan lokutan jagora.  Daidaitaccen girman zinc-plated masu girma dabam a cikin kwanaki 7-15. Custom yana ƙare a cikin kwanaki 20-30.

Tambayoyin da ake yawan yi

Menene PTFE hose ferrule?

A PTFE hose ferrule hannun riga na karfe ne wanda ke zamewa a kan tiyon PTFE (Teflon) kafin ya kutsa. Yayin aiwatar da ƙuƙumma, ferrule yana damfara wutsiya kuma ya ɗaure a jikin da ya dace, yana ƙirƙirar haɗin gwiwa wanda ke riƙe da matsi kuma yana tsayayya da cirewa.  Ruihua Hardware  yana samar da jerin 00710 a cikin girma bakwai daga DN10 zuwa DN50 don wannan dalili.

Wanne hoses na PTFE suna aiki tare da jerin ferrule 00710?

ferrules 00710 sun dace da SAE 100R14 Nau'in A da B PTFE da makamantan gine-gine. Daidaita girman ferrule DASH zuwa bututunka Girman DASH: 00710-06 don -6 hose (DN10), 00710-08 don -8 hose (DN12), har zuwa 00710-32 don -32 tiyo (DN50).

Menene ferrules 00710 aka yi daga?

Daidaitaccen ferrules 00710 ƙarfe ne mai sanyi mai jan ƙarfe tare da plating zinc don juriya na lalata. Bakin karfe 304 da nau'ikan 316 suna samuwa don layin sinadarai ko kayan abinci.  Ruihua Hardware  kuma yana iya ba da kayan aikin nickel-plated ko a sarari akan buƙata.

Zan iya murkushe ferrules 00710 tare da daidaitaccen na'ura mai lalata?

Ee. 00710 ferrules suna aiki tare da Finn-Power, UNIFLEX, da daidaitattun injunan crimp na kasar Sin. Yi amfani da saitin mutu wanda yayi daidai da diamita na ferrule don girman DASH ɗin ku. Babu kayan aiki na musamman da ake buƙata.

Kuna samar da takaddun shaida da takaddun fitarwa?

Kowane rukuni yana jigilar kaya tare da rahoton dubawa mai girma da takardar shaidar abu (rahoton gwajin niƙa).  Hardware Ruihua  kuma na iya ba da bayanan yarda da ROHS da REACH da Takaddun Asalin don odar fitarwa. Ana samun ƙarin rahotannin gwaji (fashi gishiri, taurin) akan buƙata.

Menene mafi ƙarancin adadin oda da lokacin jagora?

MOQ shine guda 500 a kowane girman don daidaitattun ferrules da aka yi da zinc. Lokacin jagora shine kwanaki 7-15 na aiki don abubuwan hannun jari da kwanaki 20-30 don jiyya na saman al'ada ko nau'ikan bakin karfe. Za'a iya shirya samfurin samfurin 50-100 guda don sababbin abokan ciniki.

Sami Quote don 00710 PTFE Hose Ferrules

Aiko mana da lissafin girman ku da adadin ku. Muna ba da amsa tare da farashi, lokacin jagora, da farashin jigilar kaya a cikin awanni 24. Sabbin abokan ciniki - samfurin umarni na 50-100 guda suna samuwa.

• Imel: ruihua@rhhardware.com

• WhatsApp: + 86 137 3604 8924

• Waya:  + 86-574-62268512