Hydraulic Fittings: Metric vs. Imperial Threads chungchanga kaihhruaina hnuhnung ber (Leh duhthlanna dik siam dan)

RUIHUA HARDWARE-ah hian nitin hydraulic connection puzzle kan solve thin. Zawhna kan tawn tlanglawn ber—leh pawimawh ber— pakhat chu metric leh imperial thread inthlauhna bulpui ber hi a ni. Thil thlan dik loh chuan leak, system failure, leh chhiatna man to tak tak a thlen thei. He kaihhruaina hian buaina chu a tichiang ang a, inzawmna ṭha famkim i siam ngei ang.

The Core Difference: It’s More Than Just Inches vs. Millimeters

Measurement system hrang hrang a awm laiin, a danglamna ber chu an   sealing philosophy- ah a awm a ni.

Metric Threads (eg, M, MZ): Thread ngei pawh hi  seal a ni LO . Parallel metric thread (M12x1.5 ang chi) te hi sealing element hran, O-ring emaw metal washer emaw ang chi, hmai pakhata compressed-ah an innghat a ni. He design hian sealing tha tak, rintlak tak a pe a, tunlai international standard (ISO) a ni.

Imperial Threads (eg, BSPP, BSPT, NPT): Thread hi  seal PART OF a ni fo thin . Tapered thread (BSPT emaw NPT ang chi) hian thread te ngei pawh metal-to-metal interference hmangin seal a siam a, a tlangpuiin sealant tape emaw paste emaw a mamawh thin. Parallel imperial thread (BSPP/G-series) te hian sealing atan bonded washer an hmang thin.

---

Quick-Reference hmanga tehkhin dan Table

---

The RUIHUA HARDWARE Expert Guide to Identification & Selection

1. Dan Rangkachak: Tihluh ngai suh!

Thread te chu kut hmanga screw tha taka a inzawm loh chuan   STOP . 'close-enough' fit force hian cross-thread a ti ang a, connection a tichhia ang. Fitting a intan ang maia lang mahse tight anga hriat chu major red flag a ni.

2. I Thil neih I Hriat Dan:

Outer Diameter teh rawh: Mipa thread-ah caliper hmang ang che.

Pitch/TPI tihfel: Hei hi a pawimawh ber a ni. Thread pitch gauge hmang rawh.

Thread Angle en rawh: Metric emaw NPT emaw lam hawi 60°; 55° a ni a, BSP a ni.

Taper a awm leh awm loh enfiah: Fitting chu a sir dinglamah dah rawh. Tapered threads a lang chiang hle.

3. Tunlai System atana kan Thurawn:

Thil siamtu lar tak angin RUIHUA HARDWARE hian   O-ring seal nei metric-threaded fittings (eg, ISO 1179-1 thleng) a champion a ni . Leak-free reliability an pe a, vibration an tuar thei a, degradation awm lovin reassembly tam tak an siam thei bawk—chu chuan design thar leh maintenance atan duhthlanna tha zawk an ni.

4. Conversion Challenge chinfel dan:

Imperial port nei mahse metric hose connect a ngai em?   Improvise suh. A safe solution chu engineer tha tak hman hi a ni   transition adapter . RUIHUA hian thread standard eng pawh him tak leh rintlak taka bridge turin heng adapter chi hrang hrang hi a siam a, a stock bawk.

---

Partner with Precision, Avoid Costly Downtime

System integrity atan thread chi hrang hrang hriatthiam a pawimawh hle. RUIHUA HARDWARE-ah hian fittings chauh kan supply lo va; i hydraulic system te chu secure, leak-free foundation-a sak a nih theih nan expertise kan pe a ni.

Thread hriat theihna harsatna i tawk em?

I project atana metric standard rintlak, tunlai tak tak tarlan turin i inpeih em?

Vawiin hian RUIHUA HARDWARE hnenah zawhfiah theih a ni. Kan technical team hi flawless hydraulic connection siamna atana i kaihhruaina ni rawh se.