SAE Vs ​​NPT Thread

Intii aan ku guda jiray sahaminta qalabyada warshadaha iyo adapters-ka, waxaan la kulmay wax runtii xiiso leh: SAE iyo dunta NPT. Ka fakar iyaga inay yihiin xiddigaha muuqaalka gadaashiisa ee mashiinadayada. Waxay u ekaan karaan jaleecada hore, laakiin dhab ahaantii aad ayay uga duwan yihiin sida loo qaabeeyey, sida ay u shaqeeyaan, iyo sida ay wax u xidhaan. Aad ayaan ugu faraxsanahay inaan kula wadaago wixii aan ka bartay mawduucyadan. Aynu gudaha u galno oo aynu ogaano waxa iyaga ka sooca iyo sababta mid kastaa ay muhiim ugu tahay samaynta mishiinadayadu si fiican u shaqeeyaan oo ay u sii raagayaan.

Fahamka Xargaha SAE

Qeexida iyo Noocyada iyo Astaamaha Xargaha SAE

Xadhkaha SAE waa dunta saxda ah ee si weyn loogu isticmaalo warshadaha baabuurta iyo haydarooliga. Mawduucyadani waxay raacaan heerarka ay dejisay Bulshada Injineerada Gawaarida (SAE). Waxaa jira noocyo kala duwan oo SAE Thread ah, laakiin kuwa ugu caansan waa O-Ring Boss Toosan (ORB). Noocani wuxuu leeyahay dun toosan iyo giraanta O-ring oo loogu talagalay in lagu abuuro shaabad. Halbeegga ku-xidhnaanta tuubbada SAE J514 ayaa qeexaya qeexitaannada duntan.

Astaamaha dunta SAE waxaa ka mid ah:

l  Dhexroorrada isku midka ah ee  gaarka ah cabbirrada boodhka

l  Naqshad toosan  oo u oggolaanaysa isticmaalka O-ring

l  Waafaqsanaanta heerka SAE J518  ee qalabyada flanges

Codsiyada iyo ku habboonaanta Haydarulisyada

Haydarooliga, dunta SAE ayaa muhiim u ah. Waxay xaqiijiyaan xidhiidh la'aanta nidaamka cadaadiska sare. Qalabka O-Ring Boss ee ku habboon ayaa si gaar ah u khuseeya sababtoo ah waxay xamili karaan dareere badan oo biyo-biyood ah iyada oo aan la daadan. Xidhiidhiyaha Labka ah ee SAE iyo xidhiidhiyaha dheddigga ee SAE ayaa udub dhexaad u ah Isku xirka SAE Fittings si loo abuuro nidaam adag.

Codsiyada waxaa ka mid ah:

l  Bambooyinka Haydarooliga

l  Valves

l  Silinder

Dufankan ayaa ilaalinaya daacadnimada nidaamka iyaga oo ka hortagaya daadinta dareeraha, taas oo muhiim u ah badbaadada iyo waxtarka.

Cabirka dunta SAE iyo Aqoonsiga

Aqoonsiga cabbirrada dunta SAE waa mid toos ah. Dul kasta waxaa lagu calaamadeeyay nambarka dhididka ah (tusaale, -4, -6, -8) taasoo u dhiganta cabbirka dunta lix iyo tobnaad ee inch. Tusaale ahaan, cabbirka dunta -8 macnaheedu waa dhexroorka duntu waa 8/16 ama 1/2 inch.

Si loo aqoonsado dunta SAE:

1. Cabbir dhexroorka dunta labka ah ama dhexroorka dunta dheddigga.

2. Tiri tirada dunta halkii inch (TPI).

Heerka SAE J518, oo ay weheliso heerarka caalamiga ah sida DIN 20066, ISO/DIS 6162, iyo JIS B 8363, waxay siisaa hage dhammaystiran oo loogu talagalay Cabbirrada Thread SAE oo ay ku jiraan faahfaahinta sida cabbirrada xajinta flange iyo cabbirrada boodhka ku habboon.

Marka la soo koobo, dunta SAE waxay udub dhexaad u yihiin nidaamyada hydraulic, hubinta shaabad la isku halayn karo oo hufan. Xajmigooda iyo noocyadooda la jaan-qaaday, sida O-Ring Boss-ka Toosan, waxay ka dhigaan door-doorasho xirfadlayaasha warshadaha. Fahamka duntan ayaa lama huraan u ah qof kasta oo la tacaalaya qalabyada hawo-mareenka iyo adapters-ka.

Tilmaan faahfaahsan oo ku saabsan Cabbirrada Xargaha SAE iyo Tilmaamaha

Dulmar guud ee jaantusyada iyo cabirrada SAE Thread

Marka aan ka hadalno jaantusyada dunta SAE, waxaan tixraaceynaa nidaam kala saaraya cabbirada iyo cabbirada dunta loo isticmaalo isku xirka tuubooyinka hawo-qabka iyo qalabka ku rakiban. Nooca Xadhkaha SAE waa shay muhiim u ah hubinta isku xidhka badbaadada iyo dareere la'aanta ee nidaamyada hawo-biyoodka. Si ka duwan dunta NPT ama dunta tuubbooyinka Qaranka, kuwaas oo leh nakhshad duuban, dunta SAE badanaa waa toosan oo waxay u baahan yihiin O-ring si loo sameeyo shaabad aan biyuhu karin.

Tilmaamaha Xidhiidhiyaha Lab iyo Dheddig ee SAE

Kuwa idinka mid ah ee la shaqeeya SAE Labka Xidhiidhiyaha iyo qaybaha isku xidhka dheddigga ee SAE, waa muhiim inaad fahanto tilmaamahooda. Xidhiidhiyaha Labka ah ee SAE caadiyan waxa uu leeyahay dun dibadeed, halka SAE Dumarku la yimaad dun gudaha ah, oo loogu talagalay in ay si aan kala go 'lahayn isugu xidhmaan midba midka kale. Marka la isku xidho qalabyada SAE, waxaa muhiim ah in si sax ah loo waafajiyo qaybaha lab iyo dheddig si looga hortago daadadyada iyo in la hubiyo waxqabadka ugu fiican.

l  SAE Lab Xidhiidhiyaha : Dunta dibadda, loo isticmaalo O-Ring Boss  iyo hababka xajin flange  .

l  SAE Dheddig Xidhiidhiyaha : Dunta gudaha ah, la jaan qaadaya isku-xirayaasha lab ah oo loogu talagalay in lagu abuuro taam sugan.

Falanqaynta qoto dheer ee SAE 45° Cabbirrada Xadhkaha Dabka

The SAE 45° Flare Thread waa nooc gaar ah oo ku habboon oo loo isticmaalo codsiyada haydarooliga ee kala duwan. Cabirkeeda waxaa loo habeeyey si loo xaqiijiyo isku xirnaan joogto ah oo la isku halayn karo. Xagasha ololka ah ee 45-degree waa mid muhiim ah maadaama ay u oggolaanayso xidhitaanka birta-ilaa-birta, iyadoo sanka ololka ee labku ku habboon yahay ku cadaadinaya tuubooyinka gubanaya ee ku habboon dheddigga. Naqshadeyntani waxay meesha ka saaraysaa baahida loo qabo habab xirid dheeri ah sida PTFE (Polytetrafluoroethylene) cajalad ama xeryahooda xirxiran.

l  Cabbirrada Bolt : Lagu habeeyey isticmaalka SAE J518 , DIN 20066 , ISO/DIS 6162 , iyo JIS B 8363.

l  O Giraan : Waa lagama maarmaan in la abuuro shaabad leh qalab toosan oo O-Ring Boss ah  .

SAE 45° Flare  – SAE J512 Xargaha Cabbirrada

THREAD OD & GARAB	QAABKA DHAASHKA	THREAD MALE OD		Aqoonsiga dunta dumarka		QAYBKA TUBE
inch - TPI		mm	inji	mm	inji	inji
5/16 - 24	-05	7.9	0.31	6.8	0.27	1/8
3/8 - 24	-06	9.5	0.38	8.4	0.33	3/16
7/16 - 20	-07	11.1	0.44	9.9	0.39	1/4
1/2 - 20	-08	12.7	0.50	11.4	0.44	5/16
5/8 - 18	-10	15.9	0.63	14.2	0.56	3/8
3/4 – 16	-12	19.1	0.75	17.5	0.69	1/2
7/8 - 14	-14	22.2	0.88	20.6	0.81	5/8
1.1/16 – 14	-17	27.0	1.06	24.9	0.98	3/4

 

SAE 45º FLARE rogmantay - SAE J512 Xargaha Cabbirrada

THREAD OD & GARAB	QAABKA DHAASHKA	THREAD MALE OD		Aqoonsiga dunta dumarka		QAYBKA TUBE
inch - TPI		mm	inji	mm	inji	inji
7/16 - 24	-07	11.1	0.44	9.9	0.39	1/4
1/2 - 20	-08	12.7	0.50	11.4	0.45	5/16
5/8 - 18	-10	15.9	0.63	14.2	0.56	3/8
11/16 - 18	-11	17.5	0.69	16.0	0.63	7/16

SAE PILOT O RING SEALS Duuliye Lab Swivel Threads Cabbirrada

THREAD OD & GARAB	QAABKA DHAASHKA	THREAD MALE OD		Aqoonsiga dunta dumarka		QAYBKA TUBE
inch - TPI		mm	inji	mm	inji	inji
5/8 - 18	-10	15.9	0.63	14.2	0.56	-6
3/4 - 18	-12	19.0	0.75	17.8	0.70	-8
7/8 - 18	-14	22.2	0.88	20.6	0.81	-10

Duuliye Duuliye dheddig ah oo wareeg ah

THREAD OD & GARAB	QAABKA DHAASHKA	THREAD MALE OD		Aqoonsiga dunta dumarka		QAYBKA TUBE
inch - TPI		mm	inji	mm	inji	inji
5/8 - 18	-10	15.9	0.63	14.2	0.56	-6
3/4 – 16	-12	19.0	0.75	17.5	0.69	-8
3/4 – 16	-12	19.0	0.75	17.5	0.69	-8

 

 

Sahaminta Xadhkaha NPT

Waa maxay Xargaha NPT? – Dulmar

Xadhkaha NPT, ama dunta tuubbooyinka Qaranka, waa nooc ka mid ah dunta dunta oo inta badan loo isticmaalo xidhidhiyaha kala-goysyada tuubooyinka. Naqshadani waxay hubisaa isku xidhka bilaashka ah sababtoo ah muuqaalkiisa duuban, kaas oo sii adkaanaya marka ku habboonaanta lagu dhejiyo tuubada. Taperku wuxuu abuuraa shaabad isagoo isku tuujiya dunta, inta badan waxaa lagu xoojiyay codsiga cajaladda PTFE ama iskudarka daboolka si loo buuxiyo daldaloolo kasta.

Shaxda Cabbirrada Xargaha NPT oo faahfaahsan

Markaad la macaamilayso dunta NPT, cabbirada saxda ah ayaa muhiim ah. Halkan waxaa ah jaantuska cabbirka dunta NPT ee la fududeeyay:

QABSIGA NPT THREAD & GARAB	QAABKA DHAASHKA	THREAD YAR OD		Aqoonsiga dunta dumarka
inch - TPI		mm	inji	mm	inji
1/8 - 27	-02	9.9	0.39	8.4		0.33
1/4 - 18	-04	13.2	0.52	11.2		0.44
3/8 - 18	-06	16.6	0.65	14.7		0.58
1/2 - 14	-08	20.6	0.81	17.8		0.70
3/4 – 14	-12	26.0	1.02	23.4		0.92
1 – 11.1/2	-16	32.5	1.28	29.5		1.16
1.1/4 - 11.1/2	-20	41.2	1.62	38.1		1.50
1.1/2 - 11.1/2	-24	47.3	1.86	43.9		1.73
2 – 11.1/2	-32	59.3	2.33	56.4		2.22
2.1/2 – 8	-40	71.5	2.82	69.1		2.72
3 – 8	-48	87.3	3.44	84.8		3.34

 

Xargaha NPT ee Codsiyada Warshadaha

Xadhkaha NPT waxay udub dhexaad u yihiin goobaha warshadaha kala duwan. Badanaa waxaa laga helaa nidaamyada gacanta ku haya dareerayaasha hawo-mareenka halkaas oo ay lagama maarmaan tahay in shaabad sugan oo cadaadis adagi ay lagama maarmaan tahay. Adabiyeyaasha NPT waxaa loo isticmaalaa in lagu xiro tuubooyinka iyo tuubooyinka cabbirrada kala duwan ama looga gudbo noocyada dunta kale, sida nooca dunta SAE, loona gudbo NPT. Marka la isku xidho qalabka SAE, kaas oo isticmaali kara nidaamka toosan ee O-Ring Boss, adaabayaashu waxay xaqiijiyaan waafaqid qaybaha NPT-threaded.

Aqoonsiga Cabbirrada Xadhkaha NPT iyo Heerarka

Si loo aqoonsado dunta NPT, waxaad u baahan doontaa inaad ogaato dhexroorka dibadda iyo tirada dunta inchkiiba. Halkan waxaa ah hage degdeg ah:

1. Cabbir dhexroorka dunta labka ah ama dhexroorka dunta dheddigga.

2. Tiri tirada dunta ugu sarreysa taako hal-inch ah si loo go'aamiyo TPI.

3. Is barbar dhig cabbiradan jaantuska caadiga ah ee NPT si aad u hesho cabbirka NPT ee u dhigma.

Waxaa muhiim ah in la ogaado in dunta NPT ay u baahan yihiin ka-qaybgal habboon si loo gaaro taam sugan. Tani waxay la macno tahay dunta lab iyo dheddigga waa in la isku maroojiyaa si ku filan si looga hortago in ay dillaacaan, laakiin maaha mid aad u adag si ay waxyeelo u geystaan.

 

Falanqaynta Isbarbardhigga ee SAE vs. Xargaha NPT

Naqshadaynta dunta: Toosan vs. Tapered

Marka la baarayo nooca SAE Thread iyo NPT Thread, farqi aasaasi ah ayaa ka muuqda naqshadahooda. Xadhkaha SAE, gaar ahaan xadhigga toosan ee O-Ring Boss, waxa lagu gartaa qaabkooda dunta toosan. Naqshadeyntani waxay u oggolaaneysaa dhexroor joogto ah oo dhan dhererka dunta. Taa beddelkeeda, Xadhkaha Dhuxusha Qaranka (NPT) waxay muujinayaan muuqaal duuban, oo soo cidhiidhinaya markay ku socdaan dhidibka dunta.

l  SAE : dunta toosan, dhexroor isku mid ah.

l  NPT : Xadhkaha duuban, dhexroorku wuu yareeyaa dunta.

Farsamooyinka Xiritaanka: O-Ring vs. Taper iyo Sealants

Xaqiijinta daacadnimada ayaa muhiim u ah ka hortagga daadinta. Xidhiidhiyaha Labka ah ee SAE iyo xidhiidhiyaha dheddig ee SAE waxay inta badan shaqaaleeyaan O-ring si ay u abuuraan shaabad. O-Ring-kani waxa uu ku fadhiyaa meel jeexdin ah oo isku ururiya marka la adkeeyo, isaga oo samaynaya xannibaad ka hortagaya dareeraha. Dhanka kale, naqshadeynta duuban ee dunta NPT waxay u baahan tahay hab ka duwan. Taperku wuxuu u oggolaanayaa in duntu ay si aad ah ugu dhejiyaan marka la isku dhejiyo, abuurista xiriir aan biyuhu lahayn. Si loo wanaajiyo saamayntan, cajalad PTFE (Polytetrafluoroethylene) ama iskudhis xidhe ah ayaa badanaa lagu dabaqaa dunta NPT.

l  SAE : Waxay u isticmaashaa O-ring  si loo xidho.

l  NPT : Waxay ku tiirsan tahay naqshadda duuban iyo shaabadeynta dheeraadka ah  ee xiriir la'aanta.

Faa'iidooyinka Xaaladda: Goorta la Isticmaalayo SAE ama NPT

Doorashada u dhaxaysa qalabka SAE iyo NPT waxay inta badan ku xiran tahay codsiga gaarka ah iyo heerarka warshadaha. Qalabka tuubada SAE J514 ayaa si weyn loogu isticmaalaa nidaamyada hawo-mareenka sababtoo ah hababka xirmooyinkooda adag iyo awoodda ay u leeyihiin inay u adkeystaan ​​cadaadiska sare. Waxaa loogu talagalay inay buuxiyaan heerarka sida SAE J518, DIN 20066, ISO/DIS 6162, iyo JIS B 8363. Qalabkani waxay ku habboon yihiin abuurista isku xirnaanta la isku halleyn karo marka la maamulayo dareeraha hawo-qaadista.

Qalabka NPT, dhanka kale, waxaa badanaa laga helaa tuubooyinka guud iyo nidaamyada hawada. Xadhkaha Heerka Qaran ee Maraykanka (ANSI/ASME B1.20.1) waa halbeeg caadi ah oo loo yaqaan duntan la duubay. Adabiyeyaasha NPT waxay ku habboon yihiin codsiyada halka dunta toosan aysan lagama maarmaan ahayn ama halka isticmaalka O-ring aysan suurtagal ahayn.

l  SAE : Waxaa loo door bidaa nidaamyada hydraulic cadaadis-sare.

l  NPT : Waxay ku badan yihiin codsiyada tuubooyinka iyo cadaadiska hoose.

Hababka ugu Fiican ee Ku rakibida Sae iyo Qalabka Isku Xidhan ee NPT

Marka la isku xidho qalabka SAE, saxnimadu waa furaha. Ku bilow inaad doorato isku xidhaha lab ee SAE saxda ah ama xidhiidhiyaha dheddig ee SAE. Hubi in waafaqsanaanta heerarka sida SAE J518, DIN 20066, ama ISO/DIS 6162. Ku toosi cabbirrada boodhka iyo qeexitaannada si aad uga fogaato xadhigga dunta.

Xidhiidhada dunta NPT, ee ay maamusho ANSI/ASME B1.20.1, waxay u baahan yihiin hab ka duwan. Codso cajalad PTFE ah ama xarun ku habboon oo xidhidhiyaha MPT si aad u hubiso shaabad biyo-xidheen ah sababtoo ah naqshadooda duuban. Iska ilaali inaad aad u adkeyso; waxay keeni kartaa dildilaac ama qallafsanaanta dunta.

Dayactirka iyo Cilad-bixinta Arrimaha Guud

Baaritaanka joogtada ah ayaa muhiim u ah hababka hawo-mareenada. Ka raadi calaamadaha xidhashada tuubbooyinka SAE J514 iyo adabiyeyaasha NPT. Haddii daadadku dhacaan, fiiri O-Ring Boss oo beddel haddii ay wax gaareen. Arrimaha dunta NPT, hubi haddii cajaladda PTFE ay u baahan tahay dib u codsi. Had iyo jeer hay qalabka dayactirka oo ku anfacaya oo leh O-rings-ka-faa'iidi ah, isku-xidhka daboolka, iyo cajaladda PTFE.

Xaqiijinta Cimri dheer iyo Hufnaan Nidaamyada Haydarooliga

Si loo ilaaliyo sharafta nidaamka, raac tillaabooyinkan:

1. Isticmaal dareeraha biyo-biyoodka saxda ah.

2. Jadwal u samee kormeerada joogtada ah ee dhammaan xiriirada.

3. Beddel qaybaha xiran isla markiiba.

4. Tuubooyinka dunta leh iyo tuubooyinka tuubooyinka ka fogee qashinka.

5. La soco isbeddelada waxqabadka nidaamka

Markaad raacdo tilmaamahan, waxaad xaqiijin kartaa isku xidhka bilaa daadsan oo aad sii dheerayn kartaa nolosha nidaamkaaga biyo-mareenada. Xusuusnow, nooca saxda ah ee SAE Thread Type ama NPT Thread wuxuu sameyn karaa dhammaan faraqa abuurista shaabado hufan oo waara.

Gabagabo

Waxaan sahminay nuucyada SAE iyo dunta NPT. Si loo soo celiyo, dunta SAE waxaa loogu talagalay nidaamyada hawo-biyoodka, oo muujinaya dun toosan oo leh O-ring si loo xiro. Xidhiidhiyaha Labka ah ee SAE iyo xidhiidhiyaha dheddigga ee SAE ayaa door muhiim ah ka ciyaara hubinta xidhiidh la'aan. Dhinaca kale, dunta NPT, ama dunta tuubada Qaranka, waxay leeyihiin naqshad duuban oo abuureysa shaabad iyada oo loo marayo cidhiidhiga ku habboonaanta, oo inta badan lagu wanaajiyo cajalad PTFE ama iskudarka xirmooyinka.

Fahamka kala duwanaanshaha waa muhiim. Noocyada SAE Thread, sida O-Ring Boss-ka Toosan ee laga helay tuubbooyinka SAE J514, waxay ku tiirsan yihiin O-ring si loo abuuro shaabad sugan. Taas bedelkeeda, dunta NPT, oo waafaqsan ANSI/ASME B1.20.1, waxay abuuraan shaabad faragelinta u dhaxaysa dunta.

Doorashada nooca dunta saxda ah lama soo koobi karo Is-waafajin la'aantu waxay horseedi kartaa daadad, nidaamyo jaban, iyo korodhka wakhtiga hoos u dhaca. Tusaale ahaan, marka la isku xidho qalabka SAE-ga ee nidaamka hawo-biyoodka, hubi in ay waafaqsan yihiin heerarka sida SAE J518, DIN 20066, ISO/DIS 6162, ama JIS B 8363. Heerarkani waxay la hadlayaan cabbirrada, oo ay ku jiraan cabbirrada boodhka iyo shuruudaha xajinta flange, hubinta ku habboonaanta ammaan iyo habboon.

Dhinaca qalabka hawo-mareenada, nooca SAE Thread wuxuu inta badan isku xiraa isku xirka O-Ring Boss, halka dunta NPT ay ku badan tahay codsiyada tuubooyinka guud. Markaad isticmaalayso adapters NPT hab loogu talagalay heerarka SAE, ka fiirso hababka kala duwan ee xirida. Giraan O-ring waxa uu bixiyaa xidhiidh aan biyo lahayn oo joogto ah nidaamyada SAE, halka nakhshad duuban ee nidaamyada NPT ay u baahan tahay ka qaybqaadashada dunta taxadarka leh si loo gaaro xiriir la'aan.

 

Gebogebadii, daacadnimada isku xidhkaaga-haddii ay ku lug leeyihiin tuubooyinka dunta leh, xidhmooyinka tuubooyinka, ama qalabka hawo-mareenka-waxay ku xidhan yihiin aqoonsiga saxda ah iyo codsiga nooca SAE Thread Type ama NPT Thread. Had iyo jeer tixraac heerarka warshadaha, sida kuwa lagu xusay, si aad u hagto doorashadaada. Xusuusnow, nooca dunta saxda ah kaliya ma hubiso taam sugan laakiin sidoo kale waxay ilaalinaysaa waxtarka iyo badbaadada nidaamkaaga oo dhan.